Влияние технологических факторов на эффект процесса полирования металлов

Abstract

The basic condition of decreasing surface roughness with abrasive polishing nom. It is shown that the polishing efficiency is increased with increasing circumferential speed of the polishing pad up to 30 m / s (or higher) while reducing the abrasive grain. Found that the presence of coarse fractions of individual share of coarse grains reduces the quality of the machined surface (roughness) due to the presence of deep scratches. To reduce the processing time needed to grit abrasive for polishing does not exceed the maximum height of the original surface microroughness