Експериментальне дослідження технології вібраційного подрібнення
Вантажиться...
Дата
2014
ORCID
DOI
Науковий ступінь
Рівень дисертації
Шифр та назва спеціальності
Рада захисту
Установа захисту
Науковий керівник
Члени комітету
Видавець
НТУ "ХПІ"
Анотація
Експериментально перевірено, що найоптимальнішим для металічного порошку є подрібнення у млині із зміщеною віссю обертання у разі накладання вібрації. В результаті пришвидшується процес подрібнення в 1,5 – 2 рази за рахунок стираючої та ударної сили розмельних тіл. Подрібнення проводили в лабораторному млині спеціальної конструкції. В якості досліджуваного матеріалу використані металеві порошки сталі ШХ15.
Grinding was carried out in a laboratory mill special design. The new laboratory setup, a comparative study of two methods of grinding metal powders: rotational method and vibroobertalnyy with direct and oblique axis of rotation. The proposed grinders sold almost all methods of destruction, but there is a major shock-obliterative It was verified experimentally that the most optimal conditions for metal powder is grinding in a mill with offset axis of rotation upon application of vibration. As a result, the process of grinding acceler-ates in 1,5–2 times due to erasing and a strike force of grinding bodies. As a result, the powder is evenly dis-tributed by fractions. As the investigated material used metal powders steel SHH15. As an grinding of bodies been used made of steel the balls with a diameter of 23 mm and 32 mm. The mass ratio of of powder and balls of 1:0,75.Grinding was carried out in a laboratory mill special design. The new laboratory setup, a comparative study of two methods of grinding metal powders: rotational method and vibroobertalnyy with direct and oblique axis of rotation. The proposed grinders sold almost all methods of destruction, but there is a major shock-obliterative It was verified experimentally that the most optimal conditions for metal powder is grinding in a mill with offset axis of rotation upon application of vibration. As a result, the process of grinding acceler-ates in 1,5–2 times due to erasing and a strike force of grinding bodies. As a result, the powder is evenly dis-tributed by fractions. As the investigated material used metal powders steel SHH15. As an grinding of bodies been used made of steel the balls with a diameter of 23 mm and 32 mm. The mass ratio of of powder and balls of 1:0,75.
Grinding was carried out in a laboratory mill special design. The new laboratory setup, a comparative study of two methods of grinding metal powders: rotational method and vibroobertalnyy with direct and oblique axis of rotation. The proposed grinders sold almost all methods of destruction, but there is a major shock-obliterative It was verified experimentally that the most optimal conditions for metal powder is grinding in a mill with offset axis of rotation upon application of vibration. As a result, the process of grinding acceler-ates in 1,5–2 times due to erasing and a strike force of grinding bodies. As a result, the powder is evenly dis-tributed by fractions. As the investigated material used metal powders steel SHH15. As an grinding of bodies been used made of steel the balls with a diameter of 23 mm and 32 mm. The mass ratio of of powder and balls of 1:0,75.Grinding was carried out in a laboratory mill special design. The new laboratory setup, a comparative study of two methods of grinding metal powders: rotational method and vibroobertalnyy with direct and oblique axis of rotation. The proposed grinders sold almost all methods of destruction, but there is a major shock-obliterative It was verified experimentally that the most optimal conditions for metal powder is grinding in a mill with offset axis of rotation upon application of vibration. As a result, the process of grinding acceler-ates in 1,5–2 times due to erasing and a strike force of grinding bodies. As a result, the powder is evenly dis-tributed by fractions. As the investigated material used metal powders steel SHH15. As an grinding of bodies been used made of steel the balls with a diameter of 23 mm and 32 mm. The mass ratio of of powder and balls of 1:0,75.
Опис
Ключові слова
металообробна промисловість, металічний порошок, вібрація, млин, гранулометричний склад, vibration, mill, metal powder, grinding
Бібліографічний опис
Рудь В. Д. Експериментальне дослідження технології вібраційного подрібнення / В. Д. Рудь, Т. Н. Гальчук, Т. Є. Божко // Вісник Нац. техн. ун-ту "ХПІ" : зб. наук. пр. Темат. вип. : Хімія, хімічна технологія та екологія. – Харків : НТУ "ХПІ". – 2014. – № 52 (1094). – С. 94-99.