Improvement of Piezoelectric Energy Harvester Efficiency Through Optimal Patch Configuration

Вантажиться...
Ескіз

Дата

ORCID

DOI

Науковий ступінь

Рівень дисертації

Шифр та назва спеціальності

Рада захисту

Установа захисту

Науковий керівник/консультант

Члени комітету

Назва журналу

Номер ISSN

Назва тому

Видавець

NTU "KhPI"

Анотація

The aim of this paper is to explore how to improve the efficiency of a vibrating hybrid energy harvester through changing the patch configuration. The results of this work identify the patch configuration that maximises output while using the same amount of piezoelectric material. Using 6 patches was found to be the most efficient when looking at the energy output from a single cycle. Stress distributions generated using ANSYS show that this was because the patches were all located in areas of high stress. The 2 patch configuration resulted in the highest energy conversion at low frequencies (peak loss factor <50Hz) while the performance of the 6 patch configuration was characterised by high energy conversion over a wider range of frequencies.

Опис

Бібліографічний опис

Gosliga J. S. Improvement of Piezoelectric Energy Harvester Efficiency Through Optimal Patch Configuration / J. S. Gosliga, O. A. Ganilova // Nonlinear Dynamics–2016 (ND-KhPI2016) : proceedings of 5th International Conference, dedicated to the 90th anniversary of Academician V. L. Rvachev, September 27-30, 2016 = Нелінійна динаміка–2016 : тези доп. 5-ї Міжнар. конф., 27-30 вересня 2016 р. – Kharkov : NTU "KhPI", 2016. – P. 92-99.

Підтвердження

Рецензія

Додано до

Згадується в