Improvement of Piezoelectric Energy Harvester Efficiency Through Optimal Patch Configuration

Ескіз

Дата

2016

ORCID

DOI

item.page.thesis.degree.name

item.page.thesis.degree.level

item.page.thesis.degree.discipline

item.page.thesis.degree.department

item.page.thesis.degree.grantor

item.page.thesis.degree.advisor

item.page.thesis.degree.committeeMember

Назва журналу

Номер ISSN

Назва тому

Видавець

NTU "KhPI"

Анотація

The aim of this paper is to explore how to improve the efficiency of a vibrating hybrid energy harvester through changing the patch configuration. The results of this work identify the patch configuration that maximises output while using the same amount of piezoelectric material. Using 6 patches was found to be the most efficient when looking at the energy output from a single cycle. Stress distributions generated using ANSYS show that this was because the patches were all located in areas of high stress. The 2 patch configuration resulted in the highest energy conversion at low frequencies (peak loss factor <50Hz) while the performance of the 6 patch configuration was characterised by high energy conversion over a wider range of frequencies.

Опис

Ключові слова

energy harvesting, hybrid, piezoelectric, shape-memory, patch optimisation

Бібліографічний опис

Gosliga J. S. Improvement of Piezoelectric Energy Harvester Efficiency Through Optimal Patch Configuration / J. S. Gosliga, O. A. Ganilova // Nonlinear Dynamics–2016 (ND-KhPI2016) : proceedings of 5th International Conference, dedicated to the 90th anniversary of Academician V. L. Rvachev, September 27-30, 2016 = Нелінійна динаміка–2016 : тези доп. 5-ї Міжнар. конф., 27-30 вересня 2016 р. – Kharkov : NTU "KhPI", 2016. – P. 92-99.

item.page.endorsement

item.page.review

item.page.supplemented

item.page.referenced