Please use this identifier to cite or link to this item: http://repository.kpi.kharkov.ua/handle/KhPI-Press/2571
Full metadata record
DC FieldValueLanguage
dc.contributor.authorАльтенбах, Х.ru
dc.contributor.authorНауменко, К.ru
dc.contributor.authorЛьвов, Геннадий Ивановичru
dc.contributor.authorПилипенко, С. Н.ru
dc.date.accessioned2013-10-15T12:23:19Z-
dc.date.available2013-10-15T12:23:19Z-
dc.date.issued2003-
dc.identifier.citationЧисленное исследование влияния технологических параметров изготовления на упругие свойства коротко-волокнистых композитных материалов / Х. Альтенбах [и др.] // Вестник Нац. техн. ун-та "ХПИ" : сб. науч. тр. Темат. вып. : Динамика и прочность машин. – Харьков : НТУ "ХПИ". – 2003. – № 12, т. 1. – С. 184-192.ru
dc.identifier.urihttp://repository.kpi.kharkov.ua/handle/KhPI-Press/2571-
dc.description.abstractThe paper presents a model which allows to estimate the elastic properties of thin-walled structures manufactured by means of injection molding. The starting point is the numerical prediction of the microstructure of the short fiber reinforced composite induced during the filling stage of the manufactur­ing process. For this purpose the commercial program Moldflow Plastic Insight® is used. The result of the filling simulation characterizing the fiber microstructure is the second rank orientation tensor. The elastic material properties after the processing are locally dependent on the orientational distribution of fibers. The constitutive model is formulated by means of the orientational averaging for the given orientation tensor. The tensor of elastic material properties is computed and translated into the format for the stress-strain analysis based on the ANSYS® finite element code. The influence of technological pa­rameters of manufacture on microstructure and elastic properties is discussed on examples of a center-gated disk and shell of revolutionen
dc.language.isoru-
dc.publisherНТУ "ХПИ"ru
dc.subjectполимерыru
dc.subjectармирование полимераru
dc.subjectкомпозитыru
dc.subjectсуспензияru
dc.subjectаппроксимация замыканияru
dc.subjectпоток суспензииru
dc.subjectмикроструктура композитаru
dc.titleЧисленное исследование влияния технологических параметров изготовления на упругие свойства коротко-волокнистых композитных материаловru
dc.typeArticleen
Appears in Collections:Вісник № 12 том 1
Кафедра "Динаміка та міцність машин"

Files in This Item:
File Description SizeFormat 
vestnik_HPI_2003_12_Altenbakh_Chislennoye issled.pdf1,98 MBAdobe PDFThumbnail
View/Open
Show simple item record  Google Scholar



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.