Mathematical Model of Heavy Duty Welded Plate Heat Exchanger and its Validation in Industry
Вантажиться...
Дата
2017
ORCID
DOI
10.3303/CET1761245
Науковий ступінь
Рівень дисертації
Шифр та назва спеціальності
Рада захисту
Установа захисту
Науковий керівник
Члени комітету
Видавець
The Italian Association of Chemical Engineering
Анотація
Plate Heat Exchanger (PHE) is one of the modern types of compact heat transfer equipment, which can significantly enhance the heat recuperation and improve efficiency of energy usage in many industrial applications. The construction of welded PHE (WPHE) is significantly widening the range of its application on temperature and pressure. The construction of investigated WPHE is developed for work in high pressure shell of ammonia synthesis column at pressure up to 32 MPa and temperature up to 520 °C. It consists of the stack of round corrugated plates with diameter 626 mm, which are welded together to form a number of channels for cold and hot streams exchanging heat. The welded collectors of special design are organizing multi pass movement of both streams with overall counter flow. The movement of two streams in one pass block is cross flow with overall counter flow in a whole WPHE. The mathematical model of considered WPHE is developed, which enables to perform the thermal and hydraulic design for specified process conditions and also rating calculations of WPHE with determined parameters of its construction. The validity of the proposed Equations and developed mathematical model is confirmed by comparison with the data of tests on WPHE installed in ammonia synthesis column at industrial enterprise of ammonia production. WPHE was operating in existing synthesis column of ammonia unit instead shell-and-tube heat exchanger. The construction of WPHE and the results of the tests are discussed. The use of WPHE instead shell-and-tube unit enable to cut down the volume occupied by heat exchanger in high pressure shell of ammonia synthesis column and allows increase of the volume of catalyst. It leads to 15 % rise of ammonia output.
Опис
Ключові слова
Бібліографічний опис
Mathematical Model of Heavy Duty Welded Plate Heat Exchanger and its Validation in Industry / L. L. Tovazhnyanskyy [et al.] // Chemical Engineering Transactions. – 2017. – Vol. 61. – P. 1483-1488.