Методи, моделі та інформаційна технологія оптимізації управління складними динамічними системами (на прикладі енергоблоку АЕС)
Вантажиться...
Дата
2020
Автори
ORCID
DOI
Науковий ступінь
доктор технічних наук
Рівень дисертації
докторська дисертація
Шифр та назва спеціальності
05.13.06 – інформаційні технології
Рада захисту
Спеціалізована вчена рада Д 64.050.07
Установа захисту
Національний технічний університет "Харківський політехнічний інститут"
Науковий керівник
Северин Валерій Петрович
Члени комітету
Куценко Олександр Сергійович
Гамаюн Ігор Петрович
Дорофєєв Юрій Іванович
Гамаюн Ігор Петрович
Дорофєєв Юрій Іванович
Видавець
Національний технічний університет "Харківський політехнічний інститут"
Анотація
Дисертація на здобуття наукового ступеня доктора технічних наук за спеціальністю 05.13.06 – інформаційні технології. – Національний технічний університет «Харківський політехнічний інститут» Міністерства освіти і науки України, Харків, 2019 р. Дисертацію присвячено розробці й обґрунтуванню методів, моделей та інформаційної технології оптимізації управління складними динамічними системами та їх дослідження для на прикладі енергоблоку АЕС. Проведено аналіз сучасних інформаційних технологій управління склад- ними динамічними системами. Розроблено наукові та методологічні основи
створення та застосування інформаційної технології для управління складними динамічними системами. Запропоновано загальні моделі динамічних систем з відносними змінними стану, на основі яких побудовано нелінійні математичні моделі для об’єктів управління енергоблоку АЕС як складних динамічних систем. Удосконалено методи аналізу математичних моделей складних динамічних
систем та виконано аналіз процесів в нелінійних моделях основних елементів енергоблоку АЕС. Узагальнено моделі інформаційно-управляючих систем для ідентифікації параметрів систем, а також для оптимізації параметрів регуляторів. Розроблено критерії оцінювання якості математичних моделей складних динамічних систем та виконано ідентифікацію параметрів моделей за експериментальними процесами в елементах енергоблоку АЕС. Розроблено інформаційну технологію оптимізації управління складними динамічними системами та приведено приклади її використання для оптимізації інформаційних управляючих систем енергоблоку АЕС. Результати досліджень дозволяють підвищити якість проектування систем управління складними динамічними об’єктами, підвищити ступінь наукової обґрунтованості технічних проектів з удосконалення систем управління енергоблоків АЕС.
Thesis for scientific degree of Doctor of Technical Sciences in specialty 05.13.06 – Information Technologies. – National Technical University "Kharkіv Polytechnic Institute", Ministry of education and science of Ukraine, Kharkіv, 2019. The dissertation is devoted to the development and justification of methods, models and information technology for optimizing control of complex dynamic systems and their study using the example of information and control systems of a nuclear power unit. The research analyzes modern information technologies of control and optimization with the purpose of their use for optimization of processes of complex dynamic systems control. As an example of a complex dynamic system the NPP unit with the WWER-1000 nuclear reactor is considered. The thesis analyzes methods of process modeling in complex dynamic systems and information control systems, quality indicators of information and control systems and possibilities of their application to the processes of control of complex dynamic systems, existing approaches and methods of synthesis of information control systems, computational optimization methods and possibilities of their use for optimization of quality indicators of information and control systems. The scientific and methodological foundations of creation and application of information technology for control of complex dynamic systems are developed which includes six basic functional elements, namely a block of systems models, a module of methods of integration, a block of calculation of criteria of quality of systems, a block of methods of optimization, a block of presentation of information and a module of data structures with the formation of data structures of tasks and processes of optimization and a functional model of process of optimization of control of complex dynamic systems that allows filing data structures with the ability to continue the process of optimizing the complex dynamic system and presenting the results in text and graphical forms. General models of dynamic systems with relative state changes are proposed, on the basis of which nonlinear mathematical models for the control units of NPP units as complex dynamic systems are constructed. Based on the neutron kinetics of the reactor, gradual heat dissipation, thermal processes in the fuel, shells and coolant, changes in xenon and boron concentrations, concentrated and vertically distributed models of the WWER-1000 nuclear reactor have been developed. According to the equations of heat transfer, material and thermal balance of steam generation, circulation, the main steam collector, the drive of steam turbine valve and the actuator of regulating feed valve, the model of PGV-1000 steam generator has been built. The K-1000-60/1500-2 steam turbine model is built based on the pressure equations in constant volumes of a steam turbine which include steam flow, the rotor speed equation using the turbine variable power. Methods of analysis of mathematical models of dynamic systems are improved with the use of matrix methods of integration of systems of differential equations that is the method of the matrix exponent and its integral for integration of linear systems, system methods of the first, second and third degrees for integration of nonlinear systems, which ensures the improvement of accuracy processes compared to other methods. The analysis of transients in nonlinear concentrated and vertically distributed models of the WWER-1000 reactor, the model of the PGV-1000 steam generator and the K-1000-60/1500-2 steam turbine has been made. For the vertically distributed reactor model, the axial offset is calculated. Models of information control systems for identification of parameters of information control systems and for optimization of parameters of regulators have been generalized. The thesis develops models of information control systems of NPP unit, namely the models of Neutron power of nuclear reactor, the model of water level in steam generator, the model of rotation speed of steam turbine rotor, the model of a whole power unit to maintain neural power of the reactor and to maintain the pressure in the main steam collector in the form of differential equations, systems of differential equations, variable and permanent parameters, external actions included in the block of models of systems of information technology. Criteria and methods for the identification of dynamic systems have been developed, a vector target identification function has been formed, a method for its calculation has been developed, and methods for unconditional optimization of scalar functions with the restart of the comparison operation have been implemented for its optimization. Mathematical models of control systems with PI regulators to identify the parameters of control objects have been generalized. The task of identifying the parameters of the model of the water level control system in the PGV-1000 steam generator according to the experimental data has been done. The thesis carries out the identification of parameters for deaerators, condensers, main steam collectors, auxiliary collectors, turbo-feed pumps, separators of superheaters, low and high heaters according to the results of adjustment tests of control systems of the second circuit of NPP units with WWER-1000 reactors. The analysis of the degree of stability and the boundaries of the area of stability for these control systems substantiates their stability. Methods of calculation of direct quality indicators of dynamic systems and improved integral quadratic estimations are developed, problems of optimization of parameters of dynamic systems are reduced to optimization of vector target functions that take into account the requirements of implementation of the system, its stability, improvement of quality indicators. One-way search optimization methods are provided to optimize vector target functions. Using information technology to optimize the control of complex dynamic systems based on models of information control systems of the WWER-1000 nuclear reactor, the PGV-1000 steam generator, the K-1000-60/1500-2 steam turbine, the systems of the second circuit of the power unit, the entire NPP unit with the WWER-1000 reactor under normal operating conditions with partial load reduction, the parameters of the regulators have been optimized according to the direct quality indicators.
Thesis for scientific degree of Doctor of Technical Sciences in specialty 05.13.06 – Information Technologies. – National Technical University "Kharkіv Polytechnic Institute", Ministry of education and science of Ukraine, Kharkіv, 2019. The dissertation is devoted to the development and justification of methods, models and information technology for optimizing control of complex dynamic systems and their study using the example of information and control systems of a nuclear power unit. The research analyzes modern information technologies of control and optimization with the purpose of their use for optimization of processes of complex dynamic systems control. As an example of a complex dynamic system the NPP unit with the WWER-1000 nuclear reactor is considered. The thesis analyzes methods of process modeling in complex dynamic systems and information control systems, quality indicators of information and control systems and possibilities of their application to the processes of control of complex dynamic systems, existing approaches and methods of synthesis of information control systems, computational optimization methods and possibilities of their use for optimization of quality indicators of information and control systems. The scientific and methodological foundations of creation and application of information technology for control of complex dynamic systems are developed which includes six basic functional elements, namely a block of systems models, a module of methods of integration, a block of calculation of criteria of quality of systems, a block of methods of optimization, a block of presentation of information and a module of data structures with the formation of data structures of tasks and processes of optimization and a functional model of process of optimization of control of complex dynamic systems that allows filing data structures with the ability to continue the process of optimizing the complex dynamic system and presenting the results in text and graphical forms. General models of dynamic systems with relative state changes are proposed, on the basis of which nonlinear mathematical models for the control units of NPP units as complex dynamic systems are constructed. Based on the neutron kinetics of the reactor, gradual heat dissipation, thermal processes in the fuel, shells and coolant, changes in xenon and boron concentrations, concentrated and vertically distributed models of the WWER-1000 nuclear reactor have been developed. According to the equations of heat transfer, material and thermal balance of steam generation, circulation, the main steam collector, the drive of steam turbine valve and the actuator of regulating feed valve, the model of PGV-1000 steam generator has been built. The K-1000-60/1500-2 steam turbine model is built based on the pressure equations in constant volumes of a steam turbine which include steam flow, the rotor speed equation using the turbine variable power. Methods of analysis of mathematical models of dynamic systems are improved with the use of matrix methods of integration of systems of differential equations that is the method of the matrix exponent and its integral for integration of linear systems, system methods of the first, second and third degrees for integration of nonlinear systems, which ensures the improvement of accuracy processes compared to other methods. The analysis of transients in nonlinear concentrated and vertically distributed models of the WWER-1000 reactor, the model of the PGV-1000 steam generator and the K-1000-60/1500-2 steam turbine has been made. For the vertically distributed reactor model, the axial offset is calculated. Models of information control systems for identification of parameters of information control systems and for optimization of parameters of regulators have been generalized. The thesis develops models of information control systems of NPP unit, namely the models of Neutron power of nuclear reactor, the model of water level in steam generator, the model of rotation speed of steam turbine rotor, the model of a whole power unit to maintain neural power of the reactor and to maintain the pressure in the main steam collector in the form of differential equations, systems of differential equations, variable and permanent parameters, external actions included in the block of models of systems of information technology. Criteria and methods for the identification of dynamic systems have been developed, a vector target identification function has been formed, a method for its calculation has been developed, and methods for unconditional optimization of scalar functions with the restart of the comparison operation have been implemented for its optimization. Mathematical models of control systems with PI regulators to identify the parameters of control objects have been generalized. The task of identifying the parameters of the model of the water level control system in the PGV-1000 steam generator according to the experimental data has been done. The thesis carries out the identification of parameters for deaerators, condensers, main steam collectors, auxiliary collectors, turbo-feed pumps, separators of superheaters, low and high heaters according to the results of adjustment tests of control systems of the second circuit of NPP units with WWER-1000 reactors. The analysis of the degree of stability and the boundaries of the area of stability for these control systems substantiates their stability. Methods of calculation of direct quality indicators of dynamic systems and improved integral quadratic estimations are developed, problems of optimization of parameters of dynamic systems are reduced to optimization of vector target functions that take into account the requirements of implementation of the system, its stability, improvement of quality indicators. One-way search optimization methods are provided to optimize vector target functions. Using information technology to optimize the control of complex dynamic systems based on models of information control systems of the WWER-1000 nuclear reactor, the PGV-1000 steam generator, the K-1000-60/1500-2 steam turbine, the systems of the second circuit of the power unit, the entire NPP unit with the WWER-1000 reactor under normal operating conditions with partial load reduction, the parameters of the regulators have been optimized according to the direct quality indicators.
Опис
Ключові слова
автореферат дисертації, інформаційна технологія, складна динамічна система, інформаційно-управляюча система, моделювання, метод оптимізації, ідентифікація, критерій якості, енергоблок АЕС, атомна електростанція, information technology, complex dynamic system, information system, control system, modeling, optimization method, identification, quality index, nuclear power unit
Бібліографічний опис
Нікуліна О. М. Методи, моделі та інформаційна технологія оптимізації управління складними динамічними системами (на прикладі енергоблоку АЕС) [Електронний ресурс] : автореф. дис. ... д-ра техн. наук : спец. 05.13.06 / Олена Миколаївна Нікуліна ; [наук. консультант Северин В. П.] ; Нац. техн. ун-т "Харків. політехн. ін-т". – Харків, 2020. – 44 с. – Бібліогр.: с. 33-41. – укр.