Static study of the most loaded elements of the differential "ELocker" when it is locked

Вантажиться...
Ескіз

Дата

DOI

Науковий ступінь

Рівень дисертації

Шифр та назва спеціальності

Рада захисту

Установа захисту

Науковий керівник/консультант

Члени комітету

Назва журналу

Номер ISSN

Назва тому

Видавець

ISMA University of Applied Sciences

Анотація

Currently, the world has created a large number of programs and software packages that implement the finite element method (FEM). It is the most common method of solving a wide range of scientific and engineering problems. This is due to the simplicity of the concepts of FEM, its inherent logic and efficiency of application. SOLIDWORKS, namely its COSMOS Works Designer module, has been selected as a software package for design and research. The developed and researched model became a rotary plate of a differential with lock "ELocker". The conducted researches allowed to determine the characteristic stress concentrators on the working surface of the rotary plate. According to the results of the calculation, the maximum displacement and deformation equivalent, as well as the minimum strength factor were determined. The temperature regime of loading does not cause fears.

Опис

Бібліографічний опис

Ostroverkh O. O. Static study of the most loaded elements of the differential "ELocker" when it is locked [Electronic resource] / O. O. Ostroverkh // Information Technologies And Management : theses of the 19ᵗʰ Intern. conf., April 22-23, 2021. – Electronic text data. – Riga, Latvia : ISMA University of Applied Science, 2021. – P. 102-103. – Retrieved from https://ismaitm.lv/conference-2021/, free (accessed: 16.04.2025).

Підтвердження

Рецензія

Додано до

Згадується в