Analysis of the possibility of using batteries of the latest technologies on samples of armored weapons and military equipment

Вантажиться...
Ескіз

Дата

2021

DOI

doi.org/10.20998/2522-9052.2021.2.21

Науковий ступінь

Рівень дисертації

Шифр та назва спеціальності

Рада захисту

Установа захисту

Науковий керівник

Члени комітету

Видавець

Національний технічний університет "Харківський політехнічний інститут"

Анотація

The subject matter of the article is mass and dimensional characteristics of batteries, their design, electrical, operational parameters and energy capabilities. The goal of the study is the possibility of using maintenance-free batteries on samples of armored weapons and military equipment. The tasks to be solved are: to analyze the existing technologies for the batteries production, their advantages and disadvantages given the peculiarities of the operation of military equipment and the main technical characteristics of the batteries; by statistical data processing to investigate the dependences of “starter” discharge modes and energy capabilities of the batteries manufactured by technologies of different generations; to investigate the possibilities of constructive implementation of power supply formation taking into account possible design changes in the engine starting system, ensuring the necessary charge stability and compensation for exceeding the cost of gel and Absorbed in Glass Mat (AGM) batteries in comparison with the cost of the type 12ST85 ones. General scientific and special methods of scientific knowledge are used. The following results were obtained: The existing technologies of battery production, their advantages and disadvantages have been analyzed taking into account the peculiarities of the operation of military equipment and the main technical characteristics of batteries. The dependences of the “starter” discharge modes and the energy capabilities of batteries made by different technologies generations have been studied. Possibilities of constructive realization of power supply formation taking into account available constructive changes in the engine electric start system, providing the necessary charge stability and compensation for excess cost of gel and AGM batteries compared to the cost of batteries type 12ST85 have been investigated. Conclusions. Using at the samples of armored vehicles and military equipment batteries made by modern technology does not require fundamental structural changes in the electrical equipment of the machine. To meet the requirements of the standards for voltage parameters in the on-board armored weapons and military equipment networks, it is necessary to install an appropriate voltage relay regulator. The issue of exceeding the cost of gel and AGM batteries compared to the cost of type 12CT-85 ones can be compensated by the absence of costs for operating materials, maintenance personnel as well as the long service life of gel or AGM batteries compared to conventional lead-acid ones.
Предметом вивчення в статті є масо-габаритні характеристики акумуляторних батарей, їх конструктивні, електричні, експлуатаційних параметрів та енергетичні можливості. Метою дослiдження є можливості використання акумуляторних батарей, що не обслуговуються, на зразках бронетанкового озброєння та військової техніки. Завдання дослідження: Проаналізувати існуючи технології виробництва акумуляторних батарей, їх переваги та недоліки з огляду на особливості експлуатації військової техніки та основні технічні характеристики акумуляторних батарей. Шляхом статистичної обробки даних дослідити залежності “стартерних” режимів розряду та енергетичних можливостей акумуляторних батарей, виготовлених за технологіями різних поколінь. Дослідити можливості конструктивної реалізації формування джерела живлення з урахуванням можливих конструктивних змін у системі електропуску двигуна, забезпечення необхідної стабільності заряду та компенсації перевищення вартості гелевих та AGM- акумуляторних батарей в порівнянні з вартістю акумуляторних батарей типу 12СТ85. Методологічною основою дослідження стали загальнонаукові та спеціальні методи наукового пізнання. Отримані наступні результати: Проаналізовані існуючи технології виробництва акумуляторних батарей, їх переваги та недоліки з огляду на особливості експлуатації військової техніки та основні технічні характеристики батарей. Досліджені залежності “стартерних” режимів розряду та енергетичних можливостей акумуляторних батарей, виготовлених за технологіями різних поколінь. Досліджені можливості конструктивної реалізації формування джерела живлення з урахуванням можливих конструктивних змін у системі електропуску двигуна, забезпечення необхідної стабільності заряду та компенсації перевищення вартості гелевих та AGM акумуляторних батарей в порівнянні з вартістю акумуляторних батарей типу 12СТ85. Висновки. Використання на зразках бронетанкового озброєння та військової техніки акумуляторних батарей, виконаних за новітніми технологіями, не потребує принципових конструктивних змін у електрообладнанні машини. Для забезпечення вимоги стандартів щодо параметрів напруги у бортових мережах об’єктів бронетанкового озброєння та військової техніки необхідне встановлення відповідного регулятора напруги. Перевищення вартості гелевих та AGM акумуляторних батарей в порівнянні з вартістю батарей типу 12СТ-85 може бути компенсовано відсутністю витрат на експлуатаційні матеріали, персонал, що забезпечує обслуговування АБ типу 12СТ85, а також тривалим терміном служби гелевих або AGM акумуляторних батарей в порівнянні з звичайними кислотно-свинцевими батареями.

Опис

Ключові слова

lead-acid batteries, gel batteries, AGM batteries, electrical equipment for armored vehicles and military equipment, свинцево-кислотний акумулятор, гелеві акумуляторні батареї, AGM акумуляторні батареї, електрообладнання зразків бронетанкового озброєння та військової техніки

Бібліографічний опис

Analysis of the possibility of using batteries of the latest technologies on samples of armored weapons and military equipment / V. Andrieiev [et al.] // Сучасні інформаційні системи = Advanced Information Systems. – 2021. – Т. 5, № 2. – С. 141-147.