Исследование теплодеформационного влияния при поверхностном упрочнении сталей термофрикционной обработкой
Вантажиться...
Дата
2016
Автори
DOI
doi.org/10.15587/1729-4061.2016.65458
Науковий ступінь
Рівень дисертації
Шифр та назва спеціальності
Рада захисту
Установа захисту
Науковий керівник
Члени комітету
Видавець
Технологічний Центр
Український державний університет залізничного транспорту
Український державний університет залізничного транспорту
Анотація
Описываются результаты изучения влияния термофрикционной обработки (ТФО) на структуру и свойства сталей с различным химическим составом. Представлены данные о распределении микротвердости по сечению образцов, фотографии микроструктур после ТФО. Показаны графики температурных полей на участке поверхности, прилегающей к кромке. Приведены данные о напряженном состоянии и фазовом составе поверхности после ТФО.
The paper deals with studying the heat deformation influence in the surface strain hardening of steels by thermofriction processing. The main objective of the work was to determine the relationship between the surface heating temperature during TFP, cooling rate, deformation, structure formation and properties of steels, hardened by TFP. The study solved the thermal conductivity problem, which allowed determining the surface heating temperature of samples of steels 15Kh11MF, 65G, U8A, Kh12M in TFP. The photographs of microstructures, which show changes over the cross section of the samples are presented. The presence of surface-hardened “white layer” with increased hardness is obvious, as evidenced by the prints of micro-hardness measurements. The data showed that the deformation mechanism of hardening in a short-term heating of the hardenable surface is predominant in TFP. It is also noted that the “deformed grained martensite” structure is formed, the hardness of which is more than twice the hardness of the martensite structure obtained in hardening of the proposed steels and can be considered as a type of nanostructure.
The paper deals with studying the heat deformation influence in the surface strain hardening of steels by thermofriction processing. The main objective of the work was to determine the relationship between the surface heating temperature during TFP, cooling rate, deformation, structure formation and properties of steels, hardened by TFP. The study solved the thermal conductivity problem, which allowed determining the surface heating temperature of samples of steels 15Kh11MF, 65G, U8A, Kh12M in TFP. The photographs of microstructures, which show changes over the cross section of the samples are presented. The presence of surface-hardened “white layer” with increased hardness is obvious, as evidenced by the prints of micro-hardness measurements. The data showed that the deformation mechanism of hardening in a short-term heating of the hardenable surface is predominant in TFP. It is also noted that the “deformed grained martensite” structure is formed, the hardness of which is more than twice the hardness of the martensite structure obtained in hardening of the proposed steels and can be considered as a type of nanostructure.
Опис
Ключові слова
термофрикционная обработка, трение, упрочняющий диск, белый слой, наклеп, ε-карбид, наноструктура, thermofriction processing, friction, hardening disc, white layer, strain hardening, ε-carbide, nanostructure
Бібліографічний опис
Волков О. А. Исследование теплодеформационного влияния при поверхностном упрочнении сталей термофрикционной обработкой / О. А. Волков // Восточно-Европейский журнал передовых технологий = Eastern-European Journal of Enterprise Technologies. – 2016. – Т. 2, № 5 (80). – С. 38-44.