Повторное продление эксплуатации литого высокотемпературного оборудования энергоблоков Кураховской ТЭС
Вантажиться...
Дата
2018
DOI
10.20998/2078-774X.2018.12.07
Науковий ступінь
Рівень дисертації
Шифр та назва спеціальності
Рада захисту
Установа захисту
Науковий керівник
Члени комітету
Видавець
НТУ "ХПИ"
Анотація
Энергоблоки ДТЭК "Кураховская ТЭС" мощностью 200 МВт с паровыми турбинами К-200-130 после достижения ими паркового ресурса на сегодняшний день требуют принятия решения о дальнейшей эксплуатации. Проведена оценка остаточного ресурса на базе 3D-пространственных аналогов для корпусов ЦВД и ЦСД паровой турбины К-200-130 мощностью 200 МВт блоков № 4, 5 ДТЭК "Кураховская ТЭС" с экспериментально полученными коэффициентами запаса прочности металла с учетом реальных условий эксплуатации согласно станционных данных поврежденности. Рассмотрены рекомендации по повторному продлению срока эксплуатации высокотемпературного энергетического оборудования.
The power-generating units at Kurakhovska Heat Power Plant have already worked off their fleet life. Since cast high-temperature casings are one of the most expensive elements of the steam turbine an issue of the possibility of refreshing extension of their service life remains to be a problem of strategic importance. This scientific paper gives the computation data of thermal and elastically deformed states of the casings of high-pressure cylinders (HPC) and average-pressure cylinders (APC) for the turbine K-200-130-3 during the main operation modes. To do the computations we used the state-of-the-art methods of mathematical simulation. The availability of service-induced damages in the design structure and the results of repair and restoration changes were taken into account. An estimation of the low-cycle fatigue and durable strength done in compliance with current normative documents is indicative of the exhaust of life indices of the basic metal of casing elements. However, previous investigations of the physical and mechanical structure of metal with the exhausted fleet life allow us to use lower coefficients of the margin of safety. The service life of the casings of HPC and APC of the power-generating unit № 4 at Kurakhovska Heat Power Plant can be extended by 50 thousand hours and that of the power-generating unit № 5 by 45 thousand hours after the expert commission adopts the coefficients of the margin of safety at the level of 3 for the number of cycles and at the level of 1.25 for the strain.
The power-generating units at Kurakhovska Heat Power Plant have already worked off their fleet life. Since cast high-temperature casings are one of the most expensive elements of the steam turbine an issue of the possibility of refreshing extension of their service life remains to be a problem of strategic importance. This scientific paper gives the computation data of thermal and elastically deformed states of the casings of high-pressure cylinders (HPC) and average-pressure cylinders (APC) for the turbine K-200-130-3 during the main operation modes. To do the computations we used the state-of-the-art methods of mathematical simulation. The availability of service-induced damages in the design structure and the results of repair and restoration changes were taken into account. An estimation of the low-cycle fatigue and durable strength done in compliance with current normative documents is indicative of the exhaust of life indices of the basic metal of casing elements. However, previous investigations of the physical and mechanical structure of metal with the exhausted fleet life allow us to use lower coefficients of the margin of safety. The service life of the casings of HPC and APC of the power-generating unit № 4 at Kurakhovska Heat Power Plant can be extended by 50 thousand hours and that of the power-generating unit № 5 by 45 thousand hours after the expert commission adopts the coefficients of the margin of safety at the level of 3 for the number of cycles and at the level of 1.25 for the strain.
Опис
Ключові слова
корпус СД, корпус ВД, пуск, холодное состояние, неостывшее состояние, горячее состояние, остаточный ресурс, малоцикловая усталость, длительная прочность, average pressure casing, high-pressure casing, cold start-up, warm start-up, hot start-up, residual life, low-cycle fatigue, long-term strength
Бібліографічний опис
Черноусенко О. Ю. Повторное продление эксплуатации литого высокотемпературного оборудования энергоблоков Кураховской ТЭС / О. Ю. Черноусенко, Д. В. Рындюк, В. А. Пешко // Вісник Нац. техн. ун-ту "ХПІ" : зб. наук. пр. Сер. : Енергетичні та теплотехнічні процеси й устаткування = Bulletin of the National Technical University "KhPI" : coll. sci. papers. Ser. : Power and Heat Engineering Processes and Equipment. – Харків : НТУ "ХПІ", 2018. – № 12 (1288). – С. 38-45.