Кафедра "Видобування нафти, газу та конденсату"

Постійне посилання колекціїhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/927

Офіційний сайт кафедри http://web.kpi.kharkov.ua/dngik

Кафедра "Видобування нафти, газу та конденсату" була заснована в 2010 році для підготовки спеціалістів в нафтогазовій промисловості.

Характерною рисою діяльності кафедри "Видобування нафти, газу та конденсату" є постійний зв'язок з підприємствами та організаціями-замовниками фахівців. Випускники кафедри працюють у галузі видобування, транспортування, використання та реалізації нафти і газу, а також великої кількості сировини, отриманої при їх технологічній переробці.

Кафедра входить до складу Навчально-наукового інституту хімічних технологій та інженерії Національного технічного університету "Харківський політехнічний інститут".

У складі науково-педагогічного колективу кафедри працюють: 2 доктора технічних наук, 3 кандидата технічних наук; 2 співробітника мають звання професора, 1 – доцента, 1 – старшого наукового співробітника.

Переглянути

Зараз показуємо 1 - 20 з 800

450 років "De Re Metallica" Ґеоргія Аґріколи
(2006) Білецький, Володимир Стефанович
Переклад, видання, вивчення і використання у науковій роботі та при підготовці кадрів друкованих пам'ятників гірництва - актуальне питання для вітчизняної науки. В Україні праці Ґ. Аґріколи раніше були перекладені тільки фрагментарно. Сучасні реалії дають нам чудову нагоду звернутися до джерел гірничої науки, переосмислити їх і створювати нове з урахуванням багатовікового досвіду.
Analysis of Dynamical Heat Conductivity of the Reservoir and Fluid Evacuation Zone on the Gas Condensate Well Flow Rate
(2020) Anzian, Kouadio Fabrice; Fyk, M. I.; Mohammed, Bassam Al-Sultan; Abbood, Mohammed Khaleel; Abdullatif, Haval Mohammed; Shapchenko, Ye. A.
This study shows that the thermal conductivity of the rock borehole adjacent to the wells varies depending on the operation of the well. This is due to the fact that the actual temperature and temperature difference affect the humidity and other thermal properties of the rocks, which in turn affect the heat transfer coeffcient across the section between the moving gas and the rocks. The static temperature field of primitive geothermal gradients acquires changes in a dynamic form. Theoretical consideration of changes in the thermal conductivity of rocks near the face and the wells is proposed to improve the prediction of gas condensate wells production. The result is achieved by introducing the specified equations of the thermal energy balance in the radial filtration and lifting of well products, which contain the coeffcients of heat exchange and throttling. The refinement bias estimation of the 10%–15% level of gas condensate well extraction is shown using proposed methodological approach to relatively well-known (traditional in the field development practice) methods for estimating the extraction of a “medium well” from a particular oil and gas field evaluation. The results of this work demonstrate important scientific, applied, educational and methodological significance of using the methodology presented by the authors.
Analysis of the technology to manufacture a hightemperature microstrip superconductive device for the electromagnetic protection of receivers
(Технологічний Центр, 2018) Fyk, Oleksandr; Kucher, Dmytro; Kucher, Larisa; Gonchar, Roman; Antonets, Volodymyr; Fyk, M. I.; Besedin, Yuri
Technological features of the process of manufacturing a high-speed high-temperature superconducting microstrip protective device which can reduce in a picosecond period (the time of switching or operation speed) the incoming power from the antenna-feeder path and the power passing through it to a level safe for sensitive semiconductor elements of the receiver (preventing current destruction of p-n junction). The study enables determination of the features and conditions for the use of modern technological methods for creating a superconducting microstrip protective device taking into account influence of the substrate material, superconductor and contacts and the method of their connection on the switching properties of superconducting films of the proposed protective device. The switching properties of superconducting films include speed of phase transition of a film from a superconducting to a nonconducting state. To determine degree of material influence on switching properties, it was proposed to use the following: lattice parameter, thermal expansion coefficient of materials, degree of interaction of molecular structures of the contacting surfaces, probability of local defects on the surface (nonconducting zones). The study outlines basic conditions (methods of film deposition, applying a certain superconducting film (YBCO) on the chosen substrate) which should be met in order to create an operable protective device. The study results make it possible to assess the degree of influence of contact materials and the method of deposition (of both film on the substrate and contacts on the film) on microstructure and switching properties of the superconducting protective device. Such results can be used in synthesis of high-temperature superconducting devices for protecting receiver elements from current destruction of their p–n junctions.
Applied aspects of maintaining gas production in a gas condensate production field at a late stage of operation
(Instytut Nafty i Gazu - Państwowy Instytut Badawczy, Poland, 2013) Fesenko, Yu. L.; Kryvulia, S. V.; Syniuk, B. B.; Fyk, M. I.
The authors are offering to use an integrated methodology based on an innovative formula for developing mature fields. Essential factors are analysed, which affect the stabilisation of natural gas and gas condensate production in mature fields in Ukraine. Examples are given of forecasted and actual increase in production of hydrocarbons with reduced well production pressures by introducing new booster compressor stations.
Applied aspects of maintaining gas production in gas condensate production field at late operational stage
(Центр Європи, 2013) Fesenko, Yu. L.; Kryvulia, S. V.; Syniuk, B. B.; Fyk, M. I.
The authors are offering to use an integrated methodology based on an innovative engineering solution for developing fields at the late operational stage. Essential factors are analysed, which affect the stabilisation of natural gas and gas condensate production. Examples are given of forecasted and actual increase in production of hydrocarbons with reduced well production pressures by introducing new booster compressor stations.
Briquetting the Carbon Phase from the Sludge Ponds at the Anzhersk Deposit
(Allerton Press, Inc., 2013) Sergeev, P. V.; Biletskyi, V. S.
The briquetting of coal slurries from the Anzhersk deposit in the Kuznets Basin is investigated. Petroleum binder and sodium lignosulfonate are employed. The solid carbon phase from the sludge ponds (ash content up to 35%) has adequate briquetting properties when petroleum binder is added. The use of sulfite waste liquor at pressures of 80–100 MPa yields mechanically strong briquets that require additional water protection.
Coal technologies with good prospects
(ТОВ "ЛізуновПрес", 2021) Biletskyi, V. S.; Shendrik, T. G.
Comparative analysis of Facebook informational and educational pages statistics
(Publishing House "Universal", 2022) Adamia, Zoia K.; Onkovуch, Ganna V.; Biletskyi, V. S.; Onkovуch, Artem D.
Recently, the global information and educational space has been constantly and intensively enriched with new phenomena and forms of their presentation that needs to be comprehended and analyzed. The authors of the article have chosen a specific segment of Facebook network and over the past few months we have tracked a small part of this global phenomenon. The first works, which presented the content analysis of individual information and educational Facebook pages, aroused public interest, prompting the authors of the article to conduct their comparative analysis used in the study of related objects and phenomena. It should be noted that all educational pages on Facebook are professionally oriented and serve to develop a professional and medical competence of the interested educational community. In this study, for comparison, the statistical data of two author's different-themed FB pages have been presented: "Медіашкола професора Ганни Онкович" "Media School of Professor Ganna Onkovych" and "Освіта за спеціальністю "Нафтогазова інженерія та технології"" Education by profession "Oil and Gas Engineering and Technology". Each page has statistical data, which are constantly updated automatically. So, a comparative analysis of Facebook informational and educational pages provides opportunities for obtaining versatile information that can be useful in the processes of monitoring and regulating information flows, in particular, professional information.
Czasopismo "Wschód" w przestrzeni informacyjnej Ukrainy
(Państwową Wyższą Szkołę Wschodnioeuropejską, Polska, 2009) Biłećkyj, Wołodymyr
Derivatography as the method for studying structure of water on solid mineral surface
(CRC Press, Taylor & Francis Group, USA, 2012) Biletskyi, V. S.; Shendrik, T. G.; Sergeev, P. V.
It is proposed to use derivatographic method for investigation of structure of water film on mineral surface. It allows to identify some kinds of moisture, particularly to differ the film moisture from other water types. For the case of hydrophilic materials this method allows to differ some kinds of film water (probably, with great energy of bond and adhesive water).
Determining the rational operating parameters for granite crushing to obtain cubiform crushed stone
(Dnipro University of Technology, 2022) Bozhyk, D. P.; Sokur, M. I.; Biletskyi, V. S.
Purpose. Determining the rational operating parameters for granite crushing under impact in the field of centrifugal forces to obtain cubiform crushed stone. In order to achieve the purpose set, the task is to determine the operating parameters for obtaining the main grain-size classes: -50.0 + 20.0; -40.0 + 20.0; -20.0 + 10.0; -10.0 + 5.0 and 5.0 mm. Methods. The crushing process of granite crushed stone is studied in the conditions of the Kolomoievskyi Granite Quarry, Dnipropetrovsk region. Granite crushed stone with an initial grain-size of 100.0-0.0 mm and strength grade of M1400 is subjected to crushing. The accelerating rotor rotation frequency is the design value n = 200-1200 min⁻¹. Fine crushing of granite is performed in a centrifugal-impact crusher by a free impact in the field of centrifugal forces. Findings. The optimal speed modes of centrifugal crusher operation, which provide the production of high-quality crushed stone with a maximum content of 90-95% cubiform fractions, have been substantiated. Originality. The yield dependences have been obtained of the grain-size classes: -50.0 + 20.0; -40.0 + 20.0; -20.0 + 10.0; -10.0 + 5.0 and 5.0 mm depending on the speed mode of the centrifugal crusher operation. Practical implications. The operating parameters for obtaining the main grain-size classes of cubiform crushed stone from granite have been determined: -50.0 + 20.0; -40.0 + 20.0; -20.0 + 10.0; -10.0 + 5.0 and 5.0 mm. In particular, it has been determined that for the production of cubiform crushed stone with -50.0 + 20.0 mm grain-size, the rotor rotation reasonable speed is 400-500 min⁻¹ (the speed of material departure from the accelerating rotor is 45-50 m/sec); for cubiform crushed stone of -40.0 + 20.0 mm grain-size, the speed mode is 200 min⁻¹ (25 m/sec); for cubiform crushed stone of -20.0 + 10.0 mm grain-size – 600-650 min⁻¹ (70-80 m/sec), respectively. The maximum content of cubiform fractions in the -20.0 + 10.0 mm grain-size class is 95%, which is achieved at a rotor speed of 650-700 min⁻¹ (departure speed is 75-80 m/sec). The maximum content of cubiform fractions in the -10.0 mm grain-size class is 94-95%, which is achieved at the accelerating rotor speed within 700-800 min⁻¹ (departure speed is 70-80 m/sec). The obtained data make it possible to practically choose a rational speed mode of the centri-fugal-impact crusher operation to obtain the maximum yield of cubiform crushed stone.
Development of Lightweight Grouting Materials Based on By-Products of Ukrainian Industry
(Національний університет "Львівська політехніка", 2023) Orlovskyy, Vitalii; Bileckyy, Volodymyr; Malovanyy, Myroslav
A new competitive class of grouting materials has been created. These lightweight grouting materials (LGM) with a density of 1370–1650 kg/m3 consist of oil well Portland cement PCTI-100, fine powder of PE grade (a by-product of fireclay production from kaolin), acidic fly ash from state district power plants, and lime dust (a by-product of lime production). The composition of the products formed during LGM hydration was clarified by X-ray phase and differential thermal analysis. The rational optimal ratios of ingredients and temperature regimes for the LGM hardening were determined according to the criteria of cement stone strength.
Development of the oil industry in the USA (Part I)
(Український культурологічний центр, 2018) Gayko, G. I.; Biletskyi, V. S.
The article looks into the history of the oil and gas industry which has been dynamically developing today. Oil and natural gas as well as their processing products have a very long history of use by mankind though the history of the world oil industry counts about as few as 150 years and the gas one less than 100 years. The authors intend to write a series of articles covering the history of the world oil industry, aimed at understanding the "anatomy of success" which is much needed for the domestic industry. This series of articles begins the exploration of the USA oil industry development.
Development of the oil industry in the USA in the 20th century (Part II)
(Український культурологічний центр, 2018) Gayko, G. I.; Biletskyi, V. S.
The article looks into the history of the oil and gas industry which has been dynamically developing today. Oil and natural gas as well as their processing products have a very long history of use by mankind though the history of the world oil industry counts as few as about 150 years and the gas industry is less than 100 years old. The authors intend to produce a series of articles covering the history of the world oil industry, aimed at understanding the "anatomy of success" which is much needed for the domestic industry. This series of articles begins the exploration of the USA oil industry development. The first part of the work deals with a period from the inception of the US oil industry to the late 19th century whereas the second part covers the 20th century.
Development of the Professional Competence of the Future Specialist Using Internet Technologies
(Publisher agency, 2023) Adamia, Zoia K.; Biletskyi, V. S.; Onkovich, Hanna V.; Onkovich, Аrtem D.
The article examines and analyzes the peculiarities of Internet didactics and its components in order to increase the effectiveness of the educational process and scientific research. Examples illustrate the use of blog didactics, Wikididactics, webinar didactics, and specialized online lecture courses. In the context of Internet didactics, the topic of information reliability is raised. As an example, the modern Ukrainian classification of scientific and educational publications is presented. Formulated methodical approaches and recommendations for their use.
Dziedzictwo kulturowe i historia górnictwa na Ukrainie: problem muzeifikacji górniczych artefaktów
(2012) Biletskyi, V. S.; Gajko, G. I.
Potężny i wielowiekowy dorobek ukraińskiego górnictwa niezaprzeczalnie potrzebuje dziś roztoczenia nad nim profesjonalnej oraz odpowiedzialnej opieki, mającej zająć się ochroną jego artefaktów. Niezbędna do tego jest naukowa i finansowa pomoc państwa. 2. Docelowo do programów nauczania w szkołach górniczych należy wprowadzić przedmiot “Historia górnictwa”, wymaga to przygotowania odpowiedniego podręcznika. Zajęcia te powinny przedstawiać wielowiekowy rozwój górnictwa jako jeden system i ewolucję dziedziny, budząc tym ciekawość studenta, podwyższając jego zaangażowanie i motywację oraz sprzyjać odrodzeniu górniczych tradycji. 3. Spośród zadań z dziedziny historii ojczystych nauk o ziemi i górnictwie należy w pierwszej kolejności podjąć się wydania drukiem publikacji powstałej na bazie prac uczonych z Akademii Kijowsko-Mohylańskiej XVII wieku — I. Gizela oraz F. Prokopowycza pt. “Traktat o kamieniu i gemach” - pierwszej ukraińskiej publikacji z zakresu nauk geologiczno-górniczych.
The effect of the change in well thermobaric properties on the flow rate from exhausted gas-condansate reservoir
(Політехніка, 2019) Аль-Султан, Мохаммед Бассам; Фик, Михайло Ілліч
To analyze the joint work of the reservoir and the well in the development of a gas field with a theoretical account of the Joule-Thomson effect in the formation and well, the application of different heat-insulating coating of the lift pipes, regulation of the mouth counterweight. Methods of research: Clarification of output and resultant technical and economic data in the design of operating modes of wells, gas dynamic calculations of the operational object of the selected field for possible options, systematized and comparative analysis of engineering options for the regulation of well production. The essence of the original research and elements of scientific novelty: a multivariate modeling of the operating modes of wells in conjunction with the productive layer of the deposit was performed, thermobaric data and thermo-technical parameters of the wells changed. Under these conditions the discharge of the well was evaluated. Proposals for the implementation of the results: the use of the developed mathematical model in the engineering practice of valuation calculations for oil and gas companies.
Energy-saving intensification of gas-condensate field production in the East of Ukraine using foaming reagents
(Dnipro University of Technology, 2019) Shendrik, O.; Fyk, M. I. ; Biletskyi, V. S.; Kryvulia, S.; Donskyi, D.; Alajmeen, A.; Pokhylko, A.
Purpose. Development of recommendations on the use of foaming surfactants (FSs) in the overall task of increasing energy and resource conservation of wells at the final stages of the development of gas condensate fields (GCFs). Methods. To achieve the goal and solve the set tasks, following methods were used: active experiment method, regression and correlation analyzes of the obtained statistical data, comparative analysis of technological regulations for the intensification of well production. Findings. Recommendations on the use of the studied FSs for intensifying the extraction of gas-condensate fluids with the specification of the geological and field characteristics of exploited fields in Eastern Ukraine in terms of Shebelynske and Zakhidno-Khrestyshchenske GСF were developed. Originality. The dependence of the cross-correlation coefficient of the "additional gas production with the use of FSs – the number of well stimulation operations" upon the period of the influence of the FSs on the reservoir – well system, being of extreme nature, has been determined. It has been established that the effectiveness of the use of the additional part of productions debit depends linearly on the initial production rate and exponentially on the frequency of the well FS-treatment. Practical implications. It has been determined that the maximum manifestation of the impact of considered FSs on downhole fluid production is achieved after 2 months. Various techniques for the application of the FSs were tested, and the regulations for the corresponding field operations were specified. Optimization of the parameter charts and processing procedures in terms of the concentration of FSs, system connection of the foam injection pipeline to the well, the rational period of introduction of the FSs in the reservoir-well system results in the decrease of the total downtime of wells during the period of operation under conditions of intensification as well as methane pollutions during purges.
Ennobling of salty coals by means of oil agglomeration
(CRC Press Taylor & Francis Group, UK, 2011) Beletskyi, V. S.; Shendrik, T. G.
The phenomenon of coal modification at oil agglomeration has been studied, specifically, changing of its structure and physical-chemical properties of surface. It was established: - agglomeration process of coal with size 0-1(3)mm is accompanying by direct adhesive contact of “coal-oil” on 75-80 % from external surface of coal. The high power chemical bonds are formed together with physical bondes in the interphase zone. This modification leads to the increasing hydrophobicity of coal surface and the contrastance of mosaic liophylic-liophobic picture; - internal surface of coal is hydrophobized by diffusing oil agent into pores and fissures. Infiltration phenomenon intensifies this process since light fractions of a binder penetrate into micropores of coal substance; - the changes in supermolecular structure of coal organic mass (COM) have been revealed in oil agglomeration process.
Examining the current of drilling mud in a power section of the screw down-hole motor
(Технологический центр, 2018) Biletskyi, V. S.; Vitryk, V.; Mishchuk, Y.; Fyk, M. I.; Dzhus, A.; Kovalchuk, Yu.; Romanyshyn, T.; Yurych, A.
By using the module Flow Simulation from the programming environment SolidWorks, we obtained parametric fields of turbulent flow of drilling mud in the subject of research – a power section of the screw down-hole motor (SDM). The subject of research is the characteristics of turbulence of the drilling mud flow. An analysis of the obtained model parametric fields of turbulent flow of drilling mud in the power section of SDM shows two distinctive regions that differ by the characteristics of turbulence in the drilling mud current. These sections are localized in the neighborhood of contact points "rotor-stator", and along the distance between these points. In the first section, the developed flow turbulence almost disappears; the dissipation of flow energy significantly decreases. In the second section, there is a developed turbulence of drilling mud, which causes increased dissipation of flow energy and a possible damage to the stator by a solid phase of drilling mud. Turbulent time scale in the second region reaches the minimum values of 0.001 s, and the metrical scale of pulsations is comparatively small – from 0.011 to 5.666 m, indicating the presence of small-scale turbulent vortices and the elevated dissipation of flow energy. Thus, the second section is the most vulnerable to a damage to the stator by a solid phase of drilling mud. An endoscopic examination of the surface of the SDM stator, which we conducted, revealed damage to its working surface, specifically deep scratches, guide scratches, cavities. Localization of damage is from the middle and to the tail part of the power section at a distance of 2.53−4.78 m from the beginning of the power section of SDM. The models obtained are recommended for using in hydraulic calculations of SDM, for choosing a rational mode of its operation.