Перегляд за Автор "Subbotina, V."
Зараз показуємо 1 - 4 з 4
Результатів на сторінці
Налаштування сортування
Документ Effect of electrolysis regimes on the structure and properties of coatings on aluminum alloys formed by anode-cathode microarc oxidation(Технологічний центр, 2018) Belozerov, V.; Sobol, O.; Mahatilova, A.; Subbotina, V.; Tabaza, Taha A.; Al-Qawabah, Safwan M.; Al-Qawabeha, Ubeidulla F.Наведено результати дослідження фазового складу і властивостей МДО-покриттів на алюмінієвих сплавах. Покриття були одержані в лужно-селікатному електроліті на змінному сінусоідальному струмі і в імпульсному режимі струму. Показано, що підвищена щільність мікророзрядів при імпульсної технології збільшує сумарну енергію, що виділяється в них. Це обумовлює підвищення швидкості зростання оксидного покриття і ймовірність утворення α-Al₂O₃ фази. Одержані при мікроплазмове оксидуванні в імпульсному струмовому режимі покриття мають високу твердість і електричну міцністьДокумент Influence of electrical parameters of the micro-arc oxidation mode on the structure and properties of coatings(Institute for Single Crystals, 2022) Subbotina, V.; Bilozerov, V.; Subbotin, O.; Barmin, O.; Hryhorieva, S.; Pysarska, N.The influence of different power sources of the micro-arc oxidation process on the peculiarities of structure formation and properties of coatings on aluminum alloy AB formed in alkali-silicate electrolyte in the anode-cathode mode is investigated. It is shown that the pulse technology and the anode-cathode mode make it possible to form coatings containing mainly oxides of the α-Al₂O₃ type (corundum) with a high growth rate. It has been established that with a small thickness of the oxide layer, the rate of heat removal both to the metal and to the electrolyte is high; this fact promotes the formation of alumina in the form of the γ-Al₂O₃ phase. The energy concentration in the thick oxidizing layer causes the formation of high-temperature modification of α-Al₂O₃. It is shown that the mechanism of α-Al₂O₃ formation is determined by two factors: the energy difference in the formation of γ-Al₂O₃ and α-Al₂O₃ phases, and the polymorphic high-temperature transformation of γ-Al₂O₃→α-Al₂O₃ in the high-temperature region of the arc discharge.Документ The influence of the conditions of microplasma processing (microarc oxidation in anode-cathode regime) of aluminum alloys on their phase composition(Технологічний центр, 2017) Belozerov, V.; Sobol, O.; Mahatilova, A.; Subbotina, V.; Tabaza, Taha A.; Al-Qawabeha, Ubeidulla F.; Al-Qawabah, Safwan M.Наведено дослідження щодо впливу режимів мікроплазмового оксидування в активованих додатками електролітах на фазово-структурний стан покриттів, що формуються на основі алюмінію. Виявлено багато-стадийность фазоутворення в процесі формування покриттів на алюмінієвих сплавах в лужно-силікатном електроліті i анодно-катодному режимі мікроплазмового оксидування. Показано вплив кристаллохімічних характеристик катіонів оброблюваного сплаву і катіонів, що входять до складу електроліту, на процес перетворення γ-Al₂O₃→α-Al₂O₃.Документ Investigation of the influence of technological conditions of microarc oxidation of magnesium alloys on their structural state and mechanical properties(Технологічний центр, 2017) Belozerov, V.; Mahatilova, A.; Sobol, O.; Subbotina, V.; Subbotin, A.Наведені дослідження структури і властивостей покриттів, отриманих при мікродуговій обробці на магнієвому сплаві. Обробка проводилася при анодно-катодному режимі в лужному електроліті з різними домішками. Показана можливість формування кристалічних оксидних покриттів різного фазового складу (MgO, MgAl₂O₄, Mg₂Sі₄, Mg₃(PO₄)₂) товщиною до 300 мкм, що мають високу адгезію з основою, гарні захисні властивості і високу твердість, яка досягає 6,6 ГПа.