Вісник № 03. Нові рішення в сучасних технологіях
Постійне посилання колекціїhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/48727
Переглянути
1 результатів
Результати пошуку
Документ Regularities of the influence of microarc oxidation of aluminum alloys on the phase-structural state of the formed oxide coatings and the peculiarities of γ-Al₂O₃ → α-Al₂O₃ polymorphic transformation during their annealing(Національний технічний університет "Харківський політехнічний інститут", 2020) Sоbоl, Oleg; Subbotina, V. V.The influence of the technological parameters of microarc oxidation on the regularities of the phase-structural state of coatings formed on D16 aluminum alloys (the main alloying element is Cu) and AMg3 (the main alloying element is Mg) and the effect of annealing in the temperature range 600–1280 °C on the γ-Al₂O₃ → α-Al₂O₃ phase transformation are investigated. It was found that in the coatings formed during microarc oxidation in a complex (alkaline-silicate) electrolyte, three main phase-structural states are revealed: γ-Al₂O₃, α-Al₂O₃ and mullite (3Al₂O₃·2SiO₂). The conditions of electrolysis allowing the formation of a two-phase state (γ-Al₂O₃ and α-Al₂O₃) on alloys of both types have been determined. It has been established that alloying elements of the AMg3 alloy provide in MAO coatings a higher stability of the γ-Al₂O₃ structure in comparison with the analogous state in MAO coatings on D16 alloy. High-temperature annealing of MAO coatings made it possible to reveal a more complete phase transformation on D16 alloy, the structural basis of which is the appearance of tetragonality in the defective cubic lattice of the γ-Al₂O₃ phase. Annealing of MAO coatings stimulates the γ → α transformation with the greatest dynamics of change in the coatings obtained on D16 alloy. At the highest annealing temperature of 1280 °C (for 60 min) as a result of γ→α transformation, the relative content of the α-Al₂O₃ phase in the coating is 89 % (coating obtained on D16 alloy) and 30 % (coating obtained on AMg3 alloy). A model of the polymorphic γ-Al₂O₃ → α-Al₂O₃ transformation in aluminum oxide is proposed, based on the ordering of the metal cationic subsystem in octahedral and tetrahedral internodes and the enhancement of this process upon the weakening of the “metal–oxygen” bond as a result of the replacement of Al ions by Cu ions that have a low binding energy with oxygen. A correlation between the relative content of the α-Al₂O₃ phase and the hardness of the MAO coating was found. With the highest content of the α-Al₂O₃ phase, the hardness reaches 16000 MPa.