Видання НТУ "ХПІ"
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/62886
Переглянути
2 результатів
Результати пошуку
Документ An adaptive controller for power quality control in high speed railway with electric locomotives with asynchronous traction motors(Національний технічний університет "Харківський політехнічний інститут", 2024) Chaib Ras, A.; Bouzerara, R.; Bouzeria, H.Power quality in an electric railway system pertains to the dependability, consistency, and purity of the electrical power provided to different components and systems within the railway infrastructure. Assessing power quality offers considerable opportunities to improve the efficiency of railway systems. Problem. Managing the flow of active and reactive power effectively, decreasing harmonic currents, and addressing the negative sequence component are all critical parts of improving power quality for electrified rail systems. As a result, flexible AC transmission systems are the major means of minimizing or decreasing these difficulties. Purpose. This study describes a half-bridge reactive power railway power conditioner (HB-RPC) with a novel Ynev balancing transformer. HB-RPC is made up of four switching devices and two DC capacitors and the compensator’s stability is determined by the operating voltage of the DC-link. Any variations or imbalances in the DC voltage might cause the compensator to operate in an unstable manner. Novelty. Of a novel balanced transformer with HB-RPC in a high-speed railway system with two scenarios. Methods. The study utilized MATLAB/Simulink software for simulation purposes. The system integrates a fuzzy logic controller (FLC) and a PI controller to optimize DC voltage, ensuring its constancy and balance, with the objective of improving the overall stability of the system. Results. The simulation outcomes illustrate the efficacy of the control approach. Through a comparison of results between scenarios (two and four trains) with the PI-basedHB-RPC and the FLC-based-HB-RPC, the system exhibits enhanced stability for the proposed railway system when employing the FLCbased-HB-RPC, compared to a controller based on PI. Practical value. The proposed configuration elucidates its role in enhancing both the dynamic performance of the system and the power quality of the three-phase rail traction chain.Документ Harmonics suppression in high-speed railway via single-phase traction converter with an LCL filter using fuzzy logic control strategy(Національний технічний університет "Харківський політехнічний інститут", 2024) Aissaoui, M.; Bouzeria, H.; Benidir, M.; Labed, M. A.The railway Traction Power Supply System (TPSS) encounters a common challenge related to high-frequency harmonic resonance, especially when employing AC-DC-AC traction drive systems in high-speed trains. This resonance issue arises when the harmonic elements introduced by the traction AC-DC converter on the grid side of trains align with the innate resonance frequency of the TPSS. The novelty the proposed work focuses on the challenges associated with resonance elevation and high-frequency harmonics in high-speed trains, while simultaneously enhancing energy quality. This is achieved by integrating a pulse-width-modulated converter on the grid side with a single-phase configuration and incorporating an LCL filter. Methodology. In order to optimize the system’s efficiency, a robust control system is employed, taking advantage of the capabilities of a fuzzy logic controller (FLC). The choice of the FLC is justified by its straight forward design and reliability, emphasizing the dedication to precise control, as fuzzy logic excels in handling complex, nonlinear systems. Through the use of linguistic variables and heuristic reasoning, the FLC adjusts to dynamic changes in the system, demonstrating its efficacy in enhancing both transient and steady-state responses. Practical value. A grid-side LCL filter-based converter was meticulously designed and rigorously simulated using the MATLAB/Simulink platform. The inclusion of advanced FLC in the system introduced a novel approach to control strategies, surpassing the traditional PI controller. Through a comprehensive comparative analysis, the simulation results showcased the remarkable efficacy of the proposed solution in an effectively mitigating high-frequency resonance within the TPSS. This outcome underscores the potential of FLC as a sophisticated control mechanism for enhancing the performance systems in railway applications, showcasing its superiority over conventional control methods. The study contributes in shedding light on innovative approaches for optimizing the control and efficiency of grid-side LCL filter-based converters in high-speed train systems.