Військовий інститут танкових військ НТУ "ХПІ"

Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/21691

Начальник інституту
Серпухов Олександр Васильович
Склад інституту
1. Факультет озброєння і військової техніки;
2. Факультет радіаційного, хімічного, біологічного захисту та екологічної безпеки;
3. Кафедра фізичного виховання спеціальної фізичної підготовки і спорту;
4. Кафедра військової підготовки офіцерів запасу;
5. Батальйон забезпечення навчального процесу.

Переглянути

Фільтри

2014 - 20193

Налаштування

Автор: search.filters.author.Ved, M. V.Ключові слова: search.filters.subject.molybdenum

Результати пошуку

Зараз показуємо 1 - 3 з 3
  • Ескіз
    Документ
    Corrosion properties of galvanic Fe–Mo(W), Fe–Mo–W coatings
    (Науково-технологічний комплекс "Інститут монокристалів", 2019) Ved, M. V.; Sakhnenko, N. D.; Karakurkchi, A. V.; Pershina, K. D.; Yermolenko, I. Yu.
    The methods of analysis of polarization dependences, the electrode impedance spectroscopy and gravimetry were used for the investigation of the corrosion properties of galvanic binary Fe–Mo(W) and ternary Fe–Mo–W coatings in the media of a different acidity. It was shown that the corrosion rate of Fe–Mo–W and Fe–Mo(W) alloys is decreased with an increase in the pH of the solutions and with the enrichment of the alloys by doping refractory components. The dependence of the control of corrosion process on the composition of electrolytic alloys has been specified. It was established that the corrosion resistance of binary alloys is 1.1 to 1.5 orders of magnitude higher in comparison with the parameters of substrate materials, in particular the mild steel. The corrosion resistance indices for the coatings applied using the ternary Fe–Mo–W alloys substantially prevail over those for mild steel, individual metals and binary Fe–Mo and Fe–W coatings. The corrosion resistance of Fe–Mo–W system is equal to 8300 Ohm·cm² and it is conditioned by the formation of the two-component layer film consisting of molybdenum oxides and tungsten oxides. Using the data of gravimetric investigations we constructed the diagrams "the corrosion depth index kh, mm/year – the composition" for the Fe–Mo–W system that allow us to define the metal content ratio for Fe–Mo(W), Fe–Mo–W alloys in order to provide an appropriate corrosion resistance depending on service conditions.
  • Ескіз
    Документ
    Functional Properties of Fe−Mo and Fe−Mo−W Galvanic Alloys
    (Springer, Heidelberg, Allemagne, 2016) Ved, M. V.; Sakhnenko, N. D.; Karakurkchi, G. V.; Yermolenko, I. Yu.; Fomina, L. P.
    The influence of the modes of electrodeposition on the morphology, topography, and structure of the galvanic alloys of iron with molybdenum and tungsten is discussed. It is shown that the increase in the corrosion resistance of Fe–Mo and Fe–Mo–W coatings in acid and neutral chloride-containing media is caused both by the elevation of their passivating ability caused by the process of alloying components and by the formation of globular surfaces with homogeneous chemical composition. The microhardnesses of Fe–Mo and Fe–Mo–W galvanic alloys prove to be 2–3 times higher than the microhardnesses of the substrates made of low-alloy steel, which can be explained by the formation of amorphous structures. The results of investigations and tribological tests show that it is reasonable to apply the coatings of double and triple iron alloys in order to reduce wear in friction couples and to increase the corrosion resistance and mechanical strength of the surfaces, which makes them promising for the repair and restoration technologies.
  • Ескіз
    Документ
    Nanostructured cobalt and iron electrodeposited alloys
    (Springer Science+Business Media, Inc., 2014) Ved, M. V.; Sakhnenko, N. D.; Glushkova, M. A.; Karakurkchi, A. V.