Підвищення якості розділового тонколистового штампування
dc.contributor.author | Мірзак, В. Я. | uk |
dc.contributor.author | Боков, М. В. | uk |
dc.date.accessioned | 2014-12-16T07:34:16Z | |
dc.date.available | 2014-12-16T07:34:16Z | |
dc.date.issued | 2014 | |
dc.description.abstract | Експериментально доведено, що при штампуванні пластин ротора встановлення штампа на механічний компенсатор похибок системи «прес-штамп», порівняно із встановленням його без компенсатора, суттєво підвищує якість штампування, зокрема висота задирки зменшується за зовнішнім контуром на 93 % та за внутрішнім - на 45 %. Отриманий результат підтверджує доцільність використання механічних компенсаторів похибок системи «прес-штамп» з метою підвищення якості розділового тонколистового штампування. | uk |
dc.description.abstract | It has been experimentally proven that while punching the rotor plates the mounting of the punch on the mechanic compensator considerably increases the quality of "press-punch" comparing with the mounting without the compensator. It occurs due to the decrease of the height of the agnail around the outer contour by 93 % and inner contour by 45 %. Distribution of the height of the agnail according to the perimeter of the plates' contour, which are punched and breached, a more even while mounting of the punch on mechanical compensator of faults of the system of "press-punch". This shows the decrease in the amplitude of the dynamic clearance. The result we have got proves the advisability of using mechanic compensators of faults of the system "press-punch" in order to increase the quality of separating thin plate punching. | en |
dc.identifier.citation | Мірзак В. Я. Підвищення якості розділового тонколистового штампування / В. Я. Мірзак, М. В. Боков // Вісник Нац. техн. ун-ту "ХПІ" : зб. наук. пр. Темат. вип. : Інноваційні технології та обладнання обробки матеріалів у машинобудуванні та металургії. – Харків : НТУ "ХПІ". – 2014. – № 43 (1086). – С. 89-97. | uk |
dc.identifier.uri | https://repository.kpi.kharkov.ua/handle/KhPI-Press/10861 | |
dc.language.iso | uk | |
dc.publisher | НТУ "ХПІ" | uk |
dc.subject | механічні компенсатори | uk |
dc.subject | тонколистове штампування | uk |
dc.subject | величина задирки | uk |
dc.subject | джерело похибок | uk |
dc.subject | пластини ротора | uk |
dc.subject | динамічне підстроювання | uk |
dc.subject | mechanic compensator | en |
dc.subject | source of faults | en |
dc.subject | rotor plates | en |
dc.subject | dynamic adjusting | en |
dc.subject | height of the agnail | en |
dc.title | Підвищення якості розділового тонколистового штампування | uk |
dc.title.alternative | Improvement of dividing thin-sheet stamping quality | en |
dc.type | Article | en |
Файли
Контейнер файлів
1 - 1 з 1
- Назва:
- vestnik_HPI_2014_43_Mirzak_Pidvyshchennia.pdf
- Розмір:
- 2.95 MB
- Формат:
- Adobe Portable Document Format
Ліцензійна угода
1 - 1 з 1
Ескіз недоступний
- Назва:
- license.txt
- Розмір:
- 11.23 KB
- Формат:
- Item-specific license agreed upon to submission
- Опис: