Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
5 результатів
Результати пошуку
Документ An Estimation of the Energy Savings of a Mainline Diesel Locomotive Equipped with an Energy Storage Device(2024) Riabov, Ievgen; Goolak, Sergey; Neduzha, LarysaThe method of improving a two-section mainline diesel locomotive by using energy storage in the traction system is considered. A mathematical model was developed to study the movement of a diesel locomotive based on the recommendations and provisions of the theory of locomotive traction. For this purpose, the movement of a diesel locomotive as part of a train along a given section of a track was studied. It was determined that the use of an energy storage device on a diesel locomotive will allow up to 64% of the energy spent on train traction to accumulate. The use of energy storage in the accumulator during electrodynamic braking ensured a reduction in fuel consumption by about 50%, regardless of the options for equipping the traction system of the diesel locomotive with an energy accumulator. It is established that regardless of the options for equipping the traction system of the diesel locomotive with an energy storage device, the indicators characterizing the degree of use of the diesel engine do not change. These research results can be used in works devoted to the improvement of the control system of energy exchange between the accumulator and traction engines of diesel locomotives.Документ Research and Optimization of Hybrid On-Board Energy Storage System of an Electric Locomotive for Quarry Rail Transport(2023) Goolak, Sergey; Kondratieva, Liliia; Riabov, Ievgen; Lukoševicius, Vaidas; Keršys, Arturas; Makaras, RolandasOperation modes of rolling stock at mining enterprises are considered and analyzed. The justification of the need to replace it with a modern specialized electric locomotive for quarry railway transport, equipped with an asynchronous traction electric drive and an on-board energy storage system, is presented. The determination of the parameters and structure of the on-board energy storage system, based on the condition of power compensation with limited power consumption from the traction network and ensuring the autonomous movement of the electric locomotive, is considered. This study was carried out by modeling the processes of energy exchange in the traction system of an electric locomotive. The use of lithium cells and supercapacitors in energy storage is considered. Variants of the hybridization of energy storage were studied from the standpoint of minimizing the weight, size, and cost indicators. It was established that reducing the mass of the energy storage device, which includes lithium cells and supercapacitors, leads to an increase in the cost of one kilowatt-hour of energy storage capacity, which reduces the attractiveness of capital expenditures for the creation of such an energy storage device. Hybridization of the energy storage device by combining lithium cells of different types practically does not improve its weight, size, and cost indicators. The recommended option is a storage capacity of energy based on LTO elements, for which it is necessary to select elements in order to minimize weight, size, and cost indicators.Документ Determination of the working energy capacity of the on-board energy storage system of an electric locomotive for quarry railway transport during working with a limitation of consumed power(Warsaw University of Technology, 2023) Kondratieva, Liliia; Bogdanovs, Arturs; Overianova, Liliia; Riabov, Ievgen; Goolak, SergeyThe use of specialized rail rolling stock which is used for transporting ore from the quarry to the crushing plant at mining enterprises is analyzed here. Electric locomotives with an asynchronous traction electric drive and an on-board energy storage system are considered for use. The calculated dependencies of the electric locomotive tractive power were analyzed and it was established that on flat sections of the track profile, the movement is carried out with a power that does not exceed 50% of the nominal one. The movement with the nominal power is carried out on the controlled uphill during the cargo half-passage. To ensure the necessary power for movement in such areas, the use of an on-board energy storage system is proposed, which should feed the traction system while limiting the power consumed from the catenary. This happens when the voltage on the pantograph drops to a minimum level. The aim of this work is to determine the on-board energy storage system parameters during the operation of the electric locomo-tive with limitation of the power consumed from the traction network. Mathematical models of the energy exchange processes in the electric locomotive traction system have been developed. The criteria for comparing options for cal-culating the parameters of the on-board energy storage system have been proposed. The criteria take into account the reduction of energy consumption during movement, the efficiency of energy storage, and the complete use of the on-board energy storage system in terms of power and working energy capacity. Based on the calculation results, it was determined that the use of an energy storage device with a power of 3,540 kW and an operating energy capacity of 63.5 kWh provides a 10% reduction in energy consumption, which is being consumed while moving along the sample section of the road. The current that can be consumed by an electric locomotive with such parameters of the on-board energy storage system is limited by 600 A.Документ Increasing the energy efficiency of the multi-motor traction electric drive of an electric locomotive for railway quarry transport(2023) Riabov, Ievgen; Goolak, Sergey; Kondratieva, Liliia; Overianova, LiliiaThe improvement of the energy efficiency of an electric locomotive for railway quarry transport with a multi-motor traction electric drive while disconnection of the traction electric motors has been investigated. Mathematical models of the movement of the train on the track section and during manoeuvring, as well as the model of the energy exchange processes in the traction electric drive, which are used to perform the traction task when the train moves on the track section, have been developed. Through mathematical modelling, the calculation of energy during movement on the track section was performed with all connected and partially disconnected electric motors. When part of the electric motors are disconnected, the energy consumption is reduced by 10% for the cargo half-passage, and by 27% for the empty direct passage. The reduction of energy consumption with disconnected electric motors during manoeuvring has been noticed. The obtained results confirm the expediency and necessity of conducting research aimed to increase the energy efficiency of the multi-motor traction electric drive of an electric locomotive for railway mining transport.Документ Analysis of the Efficiency of Traction Drive Control Systems of Electric Locomotives with Asynchronous Traction Motors(2023) Goolak, Sergey; Liubarskyi, Borys; Riabov, Ievgen; Lukoševicius, Vaidas; Keršys, Arturas; Kilikevicius, SigitasAn analysis of the operating conditions of the traction drives of an electric rolling stock with asynchronous traction motors was conducted. In the process of operation, the electric traction drive with both direct torque control and vector control was found to possibly experience unstable modes, both in terms of power supply and load. The models of electric locomotive traction drives with asynchronous electric motors with either vector or direct torque control were adapted to account for the possible presence of the aforementioned operational factors. As a result of the modeling, the starting characteristics of the electric traction drives with different control systems were obtained both in the absence and in the presence of power supply and load disturbances. The following cases were investigated for the drive with vector and direct torque control in the absence of power supply and torque disturbances: drive output at the rated speed of rotation of the electric motor shaft; 10% reduction in the rated speed; 10% increase in the rated speed. The comparison of the results obtained has demonstrated that, at lower than nominal frequencies, the electric traction drive with direct torque control has higher accuracy in its regulation of the rotational speed and torque, lower power consumption from the power supply, lower torque overshooting, but a higher level of torque pulsations than the electric traction drive with vector control. Meanwhile, at higher than nominal frequencies, the vector control has higher accuracy in its regulation of the speed, lower torque overshooting, shorter duration of transient processes, and lower torque pulsations than the direct torque control. Moreover, as a result of the investigations, the traction drive with direct torque control has been found to be more resistant to power supply and load disturbances. The results of this work are applicable to the investigation of the influence of electric traction drive control methods on the energy efficiency of the traction drive of an electric locomotive with an alternating current (AC).