Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
2 результатів
Результати пошуку
Документ Chemical deposition of CdS films from ammoniac-thiourea solutions(Технологический центр, 2018) Pancheva, Hanna; Khrystych, Olena; Mykhailova, Evgeniia; Ivashchenko, Maryna; Pilipenko, AlexeiThis paper investigates the process of chemical deposition of CdS films from ammonia-thiourea solutions. It was established that a change in the turbidity of solution occurs in the process of chemical deposition. The results of visual observations and measurement of turbidity of solution allowed us to establish that these dependences could be used to monitor the status of the process. Visual observations correlate with the obtained dependences for turbidity and suggest that the chemical deposition of CdS includes the accumulation of colloidal-dispersed precipitate in the volume of solution, agglomeration of CdS particles, and a stationary mode of the CdS film growth at the surface of a sample. The first stage of the process is matched by a sharp increase in the turbidity of solution; the second stage is accompanied by the emergence of a maximum in the dependence. No significant change in turbidity occurs at the third stage. The observation of morphology of the resulting precipitate allowed us to establish working concentrations of reagents in solution, which ensure obtaining a high-quality CdS film with a thickness not less than 100 μm. The working concentrations of cadmium chloride, ammonia, and thiourea are, respectively, 1.8, 0.6, and 8.4 g·l⁻¹. It was assumed that the CdS formation is accompanied by the formation of thiourea. This is confirmed by data on the analysis of a working solution. An analysis of the solution revealed high concentrations of the CO₃²⁻ ions, which are a product of the thiourea decomposition. The data obtained are a preliminary stage in the development of a technology of chemical deposition of CdS films from ammonia-thiourea solutions.Документ Design of the modified oxide-nickel electrode with improved electrical characteristics(Технологический центр, 2017) Sincheskul, Alexander; Pancheva, Hanna; Loboichenko, Valentyna; Avina, Svetlana; Khrystych, Olena; Pilipenko, AlexeiThe influence of lithium hydroxide was examined on the characteristic features of charge and discharge and electrical parameters of the sintered oxide-nickel electrode in a solution of potassium hydroxide. It is shown that the introduction of LiON to the composition of electrolyte does not lead to a change in the specificity of charge and discharge processes of the electrode. The experimental work conducted allowed us to establish dependences that connect the magnitude of analytical concentration of the Li⁺ ions to specific capacity and capacity output of the electrode. The results obtained show that an increase in the content of Li⁺ ions in the electrolyte from 1 to 100 g·l⁻¹ causes a growth of the electrode’s specific capacity from 0.79 (А·h)·cm⁻² to 1.84 (А·h)·cm⁻². It is optimal to introduce LiOH to the electrolyte in the amount of 30‒50 g·l⁻¹. It was established that the magnitude of specific capacity of the oxide-nickel electrode depends on the number of charge-discharge cycles and increases with an increase in the number, which is related to the slow character of the course of mass transfer processes in the volume of active mass of the electrode.