Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
3 результатів
Результати пошуку
Документ Challenges of dynamic simulationof high-speed electromagnetic valves of gas distribution devices(Національний технічний університет "Харківський політехнічний інститут", 2020) Baida, Evgeniy Ivanovich; Klymenko, Boris Vladimirovich; Pantelyat, Michael G.; Yelanskyi, Yu. A.; Trichet, D.; Wasselynck, G.High-speed electromagnetic valves of gas distribution devices are used in modern missile and space technology as jet micro-motors of the executive elements of missile stabilization systems, as well as to control the movement of spacecrafts in space. The problem of creating such valves which are simple and reliable in the operation is relevant. In this work, it is proposed at the development and design stage to perform computer modelling of mutually coupled electromechanical processes, such as: distribution of transient electromagnetic field, transients in anelectric circuit, and movement of an electromagnet armature. Besides, the calculation of the force with which the compressed gas acts on the corresponding structural elements of the valve is proposed to be performed by solving the system of Navier-Stokes equations. All problems are solved by numerical methods in axisymmetrical formulation with the corresponding initial and boundary conditions. Improvement of the accuracy of electromagnetic calculations and taking into account the movement of the armature of an electromagnet in the process of multiphysics numerical simulation is achievedusing so-called tunable elastic meshes. The paper presents a comparative analysis of the numerical results obtained for several designs of electromagnets. The features of the dynamics of high-speed electromagnets of gas distribution valves during on and off operations are analyzed, the corresponding dynamic characteristics calculated using the proposed technique are presented.Документ Investigations of the dynamics of a bistable electromagnet with improved characteristics for medium voltage vacuum circuit breakers(Національний технічний університет "Харківський політехнічний інститут", 2020) Baida, Evgeniy Ivanovich; Klymenko, Boris Vladimirovich; Vyrovets, S. V.; Pantelyat, Michael G.; Clemens, M.Introduction. Currently, for switching medium voltage circuits, vacuum circuit breakers are widely used, which have good arcing properties and high breaking capacity. One of the problems of creating the drive mechanism of such apparatus is the need to ensure the absence of contact welding when a through current of a short circuit of a given duration flows through them, which is achieved due to a certain amount of contact pressure. One of the problems arising in the design of circuit breakers is the need to fix the mechanism with a mechanical lock, which should hold the mechanism securely. This leads to significant specific mechanical loads, which in turn reduces the reliability of the circuit breaker. One way to solve these problems is to create a drive based on monostable or bistable electromagnetic actuators with highly coercive permanent magnets, which provide reliable fixation of the position of the contacts. Purpose. Investigation of the improved design of a bistable electromagnetic actuator based on permanent magnets of a medium voltage vacuum circuit breaker. Methods. Theoretical and experimental research and comparative analysis of existing and developed electromagnetic actuators. Conclusions. A new design of an electromagnetic bistable actuator with reduced overall dimensions is developed and tested. The electromechanical characteristics of the actuator correspond to the technical specifications, which is confirmed by both theoretical and experimental studies. The proposed actuator can be used as a drive mechanism for medium voltage vacuum circuit breakers.Документ Application of the computing environment maple to the calculation of the dynamics of the electromagnets in the complicated systems of forced control(Національний технічний університет "Харківський політехнічний інститут", 2019) Baida, Evgeniy Ivanovich; Clemens, M.; Klymenko, Boris Vladimirovich; Korol, Elena Gennadyevna; Pustovoitov, P. Ye.The authors propose a technique for calculating the dynamics of electromagnets operating in complex forced systems. Such forced electromagnets are widely used in electromechanical switching devices, in particular in vacuum contactors, to reduce their size, energy consumption and to increase speed, which indicates the relevance of this topic. A mathematical model of the dynamics of a forced electromagnetic system, which takes into account the peculiarities of behavior in transients of its individual elements – the mechanical system, the magnetic and electrical circuits, taking into account the interaction of the electromagnet with a control device when the apparatus is activated, contains certain signs of scientific novelty and is the purpose of the paper. The technique of calculating the dynamics of forced electromagnets uses the computing environment Maple. The calculation is based on a mathematical model, which is a system of nonlinear differentialequations of the magnetic and electric circuits, supplemented by the equations of motion of the elements of a mechanical system. The use of the computing environment Maple, applied here to automatically perform the mathematical transformations, allowsavoiding the complicated processes of choosing the numerical integration method, programming of complex and cumbersome equations and numerical integration procedures, to obtain results of calculations in convenient tabular and/or graphic form. This specifically indicates the practical significanceof this work. The results of the comparison of calculations with previously published experimental data presented in the paper indicate the high efficiencyof the proposed models and techniques.