Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
30 результатів
Фільтри
Налаштування
Результати пошуку
Документ Analysis of free vibration of porous power-law and sigmoid functionally graded sandwich plates by the R-functions method(Shahid Chamran University of Ahvaz, 2023) Kurpa, Lidiya; Shmatko, Tetyana; Awrejcewicz, Jan; Timchenko, Galina; Morachkovska, IrynaInvestigation of free vibration of porous power and sigmoid-law sandwich functionally graded (FG) plates with different boundary conditions is presented in this paper. The FG sandwich plate includes three layers. The face layers are fabricated of functionally graded material (FGM) and middle layer (core) is isotropic (ceramic). Imperfect sigmoid FG sandwich plates with even and linear-uneven porosities and nonporous core layer are studied. Developed approach has been realized in the framework of a refined theory of the first-order shear deformation theory (FSDT) using variational methods and the R-functions theory. The analytical expressions are obtained for calculating the elastic characteristics with the assumption that the values of Poisson's ratio are the same for constituent FGM materials. For rectangular plates, the obtained results are compared with known results and a good agreement is obtained. Vibration analysis of a complex-shaped porous sandwich plate made of FGM has been performed. The effect of various parameters on the dynamic behavior of the plate, such as the type and values of porosity coefficients, power index, lay-up scheme, types of FGM, has been studied.Документ Vibration and buckling of laminated plates of complex form under in-plane uniform and non-uniform loading(Politechnika Łódzka, 2019) Kurpa, Lidiya; Tkachenko, V. V.; Linnik, AnnaДокумент Free vibration analysis of FGM shell with complex planform in thermal environments(Wydawnictwo Politechniki Łódzkiej, 2019) Awrejcewicz, Jan; Kurpa, Lidiya; Shmatko, TetyanaSummary. In the present study free vibrations of FGM shallow shells of an arbitrary planform in thermal environment are investigated via R-functions method (RFM). First-order shear deformation theory of shallow shells is employed. Material properties are assumed to be temperature-dependent and expressed as nonlinear functions of temperature. The generic material properties are not only functions of temperature, but also functions of thickness direction. It is supposed that material properties vary through thickness according to a power-law distribution of the constituent’s volume fraction. The developed method is based on the combined applications of the R-functions theory, variational Ritz’s method. A comparison of the obtained results with available ones is carried out for rectangular plates and shallow shells. Vibration of shell panels with complex planform and different boundary conditions including mixed ones are studied. Solution structures and related admissible functions for shells with complex planform have been constructed by the R-functions theory. The effect of the temperature rise, geometry of the shell, material properties and constituent volume fraction index is examined.Документ Vibration analysis of laminated functionally graded shallow shells with clamped cutout of the complex form by the Ritz method and the R-functions theory(Brazilian Association of Computational Mechanics, 2019) Kurpa, Lidiya; Shmatko, Tetyana; Awrejcewicz, JanThe R-functions theory and Ritz approach are applied for analysis of free vibrations of laminated functionally graded shallow shells with different types of curvatures and complex planforms. Shallow shells are considered as sandwich shells of different types: a) face sheets of the shallow shells are made of a functionally graded material (FGM) and their cores are made of an isotropic material; b) face sheets of the shallow shells are isotropic, but the core is made of FGM. It is assumed that FGM layers are made of a mixture of metal and ceramics and effective material properties of layers are varied accordingly to Voigt’s rule. Formulation of the problem is carried out using the first-order (Timoshenko’s type) refined theory of shallow shells. Different types of boundary conditions, including clamped, simply supported, free edge and their combinations, are studied. The proposed method and the created computer code have been examined on test problems for shallow shells with rectangular planforms. In order to demonstrate the possibility of the developed approach, novel results for laminated FGM shallow shells with cut of the complex form are presented. Effects of different material distributions, mechanical properties of the constituent materials, lamination scheme, boundary conditions and geometrical parameters on natural frequencies are shown and analyzed.Документ Nonlinear vibrations of functionally graded shallow shells of a complex planform in thermal environments(CongressLine Ltd., Hungary, 2017) Awrejcewicz, Jan; Kurpa, Lidiya; Shmatko, TatianaGeometrically nonlinear vibrations of FGM shallow shells of an arbitrary planform subjected to thermal environment are investigated with the use of R-functions theory and variational methods. Nonlinear firstorder shear deformation shallow shells are employed. Material properties are assumed to be temperaturedependent and varying along the thickness direction accordingly to Voigt’s law. The developed method is based on the combined applications of R-functions theory, variational Ritz’s method, procedure by Bubnov-Galerkin, and Runge-Kutta’s approach. The effect of the temperature rise, geometry of the shell, and constituent volume fraction index is examined. A comparison of the obtained results with available ones is also carried out for rectangular plates and shallow shells.Документ Nonlinear vibrations of shallow shells and thin plates of arbitrary shape(Springer, Dordrecht, 2005) Kurpa, Lidiya; Pilgun, GalinaДокумент Research of nonlinear vibrations of orthotropic plates with a complex form(Hindawi Publishing Corporation, 2006) Kurpa, Lidiya; Shmatko, T.; Onufrienko, O. G.This paper deals with effects of large amplitude on the free and forced flexural vibrations of elastic orthotropic plates of arbitrary shape. R-function method (RFM) is applied to obtain the basis functions need for expansion of sought solution into Fourier series. The initial nonlinear system of differential equations with partial derivatives is reduced to system of ordinary nonlinear differential equations by Galerkin procedure. The solvingobtained system is carried out by Runge-Kutta or Galerkin methods. The numerical results for the plate of complex form and also rectangular form and different boundary conditions have been presented and compared with other known results.Документ Stability investigation of nonlinear vibrations of plates by R-functions method(Wydawnictwo Politechniki Łódzkiej, 2007) Awrejcewicz, Jan; Kurpa, Lidiya; Mazur, OlgaThe parametric vibrations of plates with cutouts subjected to in-plane periodic and compressive loads, are studied. The proposed approach is based on R-functions method and the classical variational approach. The influence of cutouts parameters, as well as static factors of load on stability regions and nonlinear vibrations are investigated.Документ Research of Stability and Nonlinear Vibrations by R-Functions Method(Springer Science+Business Media B. V., 2009) Awrejcewicz, Jan; Kurpa, Lidiya; Mazur, OlgaДокумент Investigation of the parametric vibration of the orthotropic plates subjected to periodic in plane forces by multi-modal approximation and R-functions method(NTU "KhPI", 2010) Awrejcewicz, Jan; Kurpa, Lidiya; Mazur, OlgaThe original method of studying parametric vibrations of orthotropic plate with complex shape is proposed. Suggested approach is based on combined application of variational methods and the R-functions theory. Using the proposed method and developed software the regular and chaotic regimes of T-shaped plate are analyzed.
- «
- 1 (current)
- 2
- 3
- »