Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
5 результатів
Результати пошуку
Документ Main technological factors determining the efficiency and quality of the vibration process(Національний технічний університет "Харківський політехнічний інститут", 2022) Mitsyk, A. V.; Fedorovich, V. A.; Grabchenko, A. I.The factors that determine the efficiency and quality of vibration treatment are indicated. Characteristic cases of interaction of abrasive granules with the processed surface are noted. The influence of the hardness of the processed part material and the shape of its surface, as well as the influence of chemically active solutions on the efficiency and quality of vibration processing, is substantiated. The characteristics of abrasive granules and their volume ratio with the processed parts are given. It is indicated that the underestimation of the possibilities of vibration processing technologies is explained by their insufficient studies. It has been established that vibration processing, depending on the characteristics and composition of the processing medium, is a mechanical or mechanochemical removal of the smallest particles of metal or its oxides and plastic deformation of microroughness due to mutual collisions of the medium granules with the processed surface, caused by vibrations of the reservoir in which the processing medium and, the processed parts are placed. It is noted that, according to the classification, vibration treatment refers to mechanical processing methods and, in particular, to the group of mechanical-chemical processing methods or to combined methods when chemically active solutions are introduced into the working medium, It is also noted that vibration treatment refers to dynamic, and for technological purposes – to dimensionless processing methods, according to the type of tool used - to the group of processing methods with a free abrasive. It has beene stablished that the efficiency of vibration processing depends on the oscillation modes of the vibrating machine, the mass of the processed parts and abrasive granules, the hardness of the parts material and the shape of their treated surfaces, the characteristics of the abrasive medium, the volume ratio of the parts and abrasive granules, as well as on the composition of the chemically active solution. The characteristic cases of interaction of abrasive granules with the processed surface are given. The situations of the highest processing productivity for performing the operations of vibration grinding, vibration polishing, washing and descaling have been established. It is noted how the hardness of the processed part and the shape of their surface affects the performance and quality of vibration processing operations. The characteristics of the working medium, which affects the efficiency and quality of vibration treatment, are given, including the influence of grain size and hardness of the material of abrasive granules. The volume ratios of abrasive and processed parts are considered. The types of actions on the vibration treatment processes are given.Документ Interaction of the abrasive medium with the treated surface and the process of metal removal during vibration treatment in the presence of a chemically active solution(Національний технічний університет "Харківський політехнічний інститут", 2021) Fedorovich, V. A.; Grabchenko, A. I.; Mitsyk, A. V.Interaction of working medium granules with the processed surface of the part is considered. It is noted that the processing methods are characterized by the dynamic interact ion of the abrasive medium with the processed surface. It is indicated that during vibration treatment there is an impact contact of the abrasive granule with the surface of the part, which leads to the formation of characteristic traces during the formation of the surface relief. The types of impact of abrasive grains of working medium granules on the surface of the processed part are identified. It is indicated that the effect of abrasive grains depends on the geometric parameters of the tops of the grains and the working contour of the granule as a whole. The alternation of the operation of abrasive grains in the connection with the nature of the motion of the granule over the surface of the part is shown. The interaction of surfaces of bodies during vibration treatment is considered. The distinctive features of the vibration treatment method from other analogs are indicated. The conditions for the formation of the surface layer of the part during vibration processing are given. The analysis of the mechani cal-physicochemical model of the micro-cutting process in the presence of a chemically active solution is carried out and a comparison of the intensity of technologies for vibration treatment of steel parts is given.Документ The effect of a shock wave in an oscillating working medium during vibration finishing-grinding processing(Національний технічний університет "Харківський політехнічний інститут", 2020) Mitsyk, A. V.; Fedorovich, V. A.; Grabchenko, A. I.The propagation of a force pulse in a working medium is considered as in a pseudo-gas, that is, the speed of sound. The movement of parts in the working medium is determined. The mechanism of the appearance of a weak shock wave, that is, a jump of the compaction in a pseudo-gas from abrasive granules is considered. The nature of the interaction of the surfaces of vibrating processed parts with granules of the working medium has been established. The characteristic of the Hugoniot adiabatic curve for pseudo-gas from granules of the working medium is given. The influence of the occurrence of a shock wave on the vibration treatment process is determined. The adequacy of theoretical and experimental studies has been established.Документ Mathematical simulation of motion of working medium at finishing-grinding treatment in the oscillating reservoir(Springer-Verlag London, 2014) Mamalis, A. G.; Grabchenko, A. I.; Mitsyk, A. V.; Fedorovich, V. A.; Kundrak, J.The results of mathematical simulation have been carried out for the pattern of working medium motion providing the technological process of finishing–grinding treatment in an oscillating reservoir. With use of physics laws, it is ascertained and grounded that the flow of granules at the plane wall of reservoir is travelling oppositely to the source of vibrations, whereas the granules are drifting on the cycloid–trochoid trajectories from the wall of reservoir, where the looped displacement is maximal, to the center of reservoir in which the shift of granules is reduced to minimum because of damping and dissipation effect. The received theoretical regulations have a fundamental nature and can be used at the account of technological parameters of designed vibration machines.Документ Development of modular machine design and technologies of dynamic action for finishing-grinding treatment by an oscillating abrasive medium(Nova Science Publishers, Inc., 2015) Mamalis, A. G.; Kundrak, J.; Mitsyk, A. V.; Fedorovich, V. A.A complex approach is proposed to designing machines and technologies for finishinggrinding treatment of complex-shaped parts by an oscillating fine-dispersed abrasive medium. A designed element base has been developed for the design-technological synthesis of the autonomously controlled actuating mechanisms in the form of the device with the processed parts and the reservoir, combined into a single aggregate modular machine. The field of combining schemes of the power actions on an abrasive medium and processed parts has been considered.