Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
6 результатів
Результати пошуку
Документ Conception of Flexible Thin-Film Solar Battery for Autonomous Hybrid Thermophotoenergy Unit(Institute of Electrical and Electronics Engineers, 2016) Kirichenko, M. V.; Zaitsev, R. V.; Lobotenko, D. S.; Zaitseva, L. V.Документ Automation of Quasi-Closed Space Method Based on ARM Microcontroller(Institute of Electrical and Electronics Engineers, 2016) Zaitsev, R. V.; Kirichenko, M. V.; Prokopenko, D. S.; Zaitseva, L. V.Документ Hybrid thermophotoenergy module with thin-film solar cells(Taras Shevchenko National University of Kyiv, 2016) Zaitsev, R. V.; Zaitseva, L. V.; Kirichenko, M. V.Документ The Сadmium Telluride Thin Films for Flexible Solar Cell Received by Magnetron Dispersion Method(Sumy State University, 2017) Zaitsev, R. V.; Khrypunov, G. S.; Veselova, N. V.; Kirichenko, M. V.; Kharchenko, M. M.; Zaitseva, L. V.For the purpose of creation of thin-film photoelectric converters on the basis of sulfide and telluride of cadmium the pilot studies of process of magnetron dispersion on a direct current of telluride of cadmium and influence of the modes of magnetron dispersion on crystalline structure of films of CdTe are conducted. CdTe films for basic layers of sheet photoelectric converters on flexible polyimide substrate by the method of magnetron dispersion on a direct current are received for the first time. It is experimentally shown that "chloride" processing of the received layers of telluride of cadmium leads to transformation of metastable hexagonal modification of telluride of cadmium in stable cubic. At the same time at the expense of the eutectic recrystallization body height of the sizes of areas of a coherent dispelling much and decrease by 1,5 times of level of microstrains is observed.Документ Advanced capacitive converters based on Al/ITO/Polyimide/Al₂O₃ heterostructures(Vasyl Stefanyk Precarpathian National University, 2015) Zaitseva, L. V.; Khrypunov, G. S.; Zaitsev, R. V.; Momotenko, O. V.Документ Hybrid photoenergy installation development(2018) Zaitsev, R. V.; Kirichenko, M. V.; Krypunov, G. S.; Zaitseva, L. V.The current problem is the autonomous supply thermal energy and hot water for civilian and military consumers. The most commonly used for this purpose are installations based on solar thermal collectors, which at the same time require an external power source up to 100 W for electronic control components and a circulating pump, which does not allow them to be fully considered as autonomous. One of the ways to solve this problem is to combine in one installation solar panels and heat collectors. It has been proposed the constructive technological solution of the hybrid photoenergy system with flexible solar cells based on cadmium telluride, which allows getting the total efficiency of such a system up to 73% for the transformation of solar energy into heat and electric energy.