Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
2 результатів
Результати пошуку
Документ Multi-component wastewater from finely dispersed impurities treatment intensification(Nicolaus Copernicus University, Poland, 2024) Bosiuk, Alona; Shkop, Andrii; Kulinich, Serhii; Samoilenko, Dmytro; Shestopalov, Oleksii; Tykhomyrova, Tetiana SergiivnaThe article deals with the intensification of flocculation wastewater treatment from finely dispersed suspended dust particles that are formed in the foundry shop at machine-building productions. The dependence of the floc sedimentation rate and wastewater clarification on solid phase concentration and flocculant flow rate was experimentally researched using model wastewater created by mixing dust and water. The multicomponent impurities of ionic flocculants on the aggregation process impact were experimentally proven, and anionic and cationic flocculants combination high efficiency was shown. The optimal parameters for the wastewater treatment process were established. The best flocculating effect and minimum flocculant consumption were observed at a solid phase concentration of 8-14 g/l. It was established that the most effective aggregate formation process is observed when two flocculants’ types are used simultaneously: anionic A-19 and cationic K-7, not each type separately. Flocculant flow rate experimental and calculated dependences for the wastewater treatment process depending on solid phase concentration and floc sedimentation speed necessary for effective sedimentation have been established. A technological scheme for wastewater treatment from suspended dust impurities that are formed in foundry shop at machine-building enterprise has been developed. The scheme includes: wastewater flocculation; water clarification in a sedimentation tank; and water deironing by aeration with coagulant addition and further filtration. It is proposed to use purified water in enterprise technological cycle that helps to reduce tap water consumption.Документ Study of the strength of flocculated structures of polydispersed coal suspensions(Технологічний центр, 2017) Shkop, Andrii; Tseitlin, Musii; Shestopalov, Oleksii; Raiko, ValentinaThe influence of concentration, dispersed composition and degree of thickening of the flocculated slime on the strength of floccules was studied. It was revealed that for the formation of durable aggregates of polydispersed coal slime it is recommended to apply the combination of the non-ionogenic and anionogenic flocculant in the ratio of 20:80 % respectively. It was established that the residual sedimentation rate of floccules after mechanical influence at the constant consumption of the flocculant has the greatest value at the concentration of solid phase in slime of 10–30 g/dm3. With an increase in the content of the portion of solid phase with coarseness of more than 40 µm, the strength of floccules increases to the larger degree than the influence of the initial concentration. This makes it possible to recommend the correction of the slime composition not only by the concentration, but also by the content of medium grade of more than 15–20 %. It was shown that with an increase in the degree of thickening of more than 140–150 g/l the resistance of aggregates to mechanical influence substantially decreases due to an increase in pseudo-plastic properties of flocculated slime.