Електротехніка і Електромеханіка

Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/62894

Офіційний сайт http://eie.khpi.edu.ua/

Журнал публікує оригінальні результати досліджень з аналітичного, чисельного та мультифізичного методів моделювання електрофізичних процесів в електротехнічних електромеханічних та електроенергетичних установках та системах, з розробки нових електротехнічних пристроїв і систем з поліпшеними техніко-економічними та екологічними показниками в таких сферах, як: теоретична електротехніка, інженерна електрофізика, техніка сильних електричних та магнітних полів, електричні машини та апарати, електротехнічні комплекси та системи, силова електроніка, електроізоляційна та кабельна техніка, електричний транспорт, електричні станції, мережі і системи, безпека електрообладнання.

Рік заснування: 2002. Періодичність: 6 разів на рік. ISSN 2074-272X (Print), ISSN 2309-3404 (Online).

Новини

Видання включене до Переліку наукових фахових видань України з технічних наук до найвищої категорії «А» згідно Наказу МОН України №1412 від 18.12.2018 р.

Переглянути

Фільтри

2023 - 20242

Налаштування

Ключові слова: search.filters.subject.stator winding

Результати пошуку

Зараз показуємо 1 - 2 з 2
  • Ескіз
    Документ
    Internal capacitive compensation of the reactive power of the screw electromechanical converter
    (Національний технічний університет "Харківський політехнічний інститут", 2024) Zablodskiy, M. M.; Chuenko, R. M.; Kovalchuk, S. I.; Kruhliak, H. V.; Kovalchuk, O. I.
    Introduction. A special category among induction machines with a massive rotor is occupied by the class of multifunctional electromechanical energy converters, which are integrated with the links of technological processes Problem. The exchange of reactive energy between the source and the electromechanical converter during periods of operation with a low load leads to a significant decrease in its efficiency and power factor. With the use of non-linear loads and taking into account possible resonance, it has become more difficult to improve the power factor by installing capacitor banks. Goal. Increasing the energy indicators of the electromechanical converter by spatial displacement of the main and additional stator windings and internal capacitive compensation. Methodology. Comparative analysis of connection schemes and spatial arrangement of stator windings when using internal capacitive compensation. Modeling and experimental studies of electromagnetic and electromechanical characteristics of a screw electromechanical converter. Results. The distribution of electromagnetic quantities was established and the choice of the angle of spatial displacement of the main and additional windings of the stator phases of the modified converter, which ensure an increase in the value of the electromagnetic torque and power factor, was justified. The results of experimental studies of the screw electromechanical converter are presented. Originality. For the first time, a method of internal capacitive compensation of reactive power is proposed for multifunctional electromechanical converters of technological purpose. Practical value. The use of the proposed method of spatial displacement of the main and additional stator windings and internal capacitive compensation will ensure an increase in the energy performance of the screw electromechanical converter.
  • Ескіз
    Документ
    Thermomechanical loads of powerful turbogenerator stator winding insulation in the presence of water cooling defects
    (Національний технічний університет "Харківський політехнічний інститут", 2023) Kuchynskyi, Kostiantyn Arturovich; Kensytskyi, O. H.
    An analysis of incidents linked to power units’ emergency disconnecting from network as a result of turbogenerators’ malfunction on the NPP of Ukraine is conducted. It is identified, that the reason of the majority of incidents is an insufficient reliability of the stator winding’s direct cooling system. Problem. The most problematic point in winding for today is the frontal parts, where, while cooling is reduced, there are not only thermal, but also thermomechanical loadings on an insulation appearing. The level of these loading depends on structural design of frontal parts and a character of violation of coolant agent circulation in a bar. In some cases they can exceed limit values. The spread and the quality of research on this issue for today are insufficient. Goal. The aim of the completed research is to determine the thermomechanical loading of insulation of stator winding bar in a powerful turbogenerator with a direct liquid cooling under condition when coolant circulation is malfunctioned. Methodology. A complex mathematical model of thermomechanical processes in an insulation of stator winding bar of a powerful turbogenerator is developed. It takes into account the real geometry of the winding bar, variable thermal loading of core elements in radial and axial directions, as well as ways of fixation of slot and frontal winding parts. Studies of thermomechanical processes in an insulation of stator winding bar of turbogenerator are conducted. Results. Values of mechanical displacement and stress for the different modes of malfunction are obtained. Areas of bar, where mechanical loading may exceed the boundaries of mechanical durability of material of insulation of stator winding are identified. With decline of coolant liquid consumption the radial displacement and stress in the winding insulation bar in the area, where the bar exits from the slot are increasing along with that the values of radial stress of insulation of the winding bar in places of frontal parts’ fixation exceed limit values. Practical significance. The offered mathematical models allow to realize calculation experiments and can be used in practice for development and validation of diagnostic systems, analysis, design and investigation of emergency situations during exploitation of turbogenerators on power stations of Ukraine.