Різання та інструменти в технологічних системах

Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/62923

Офіційний сайт http://rits.khpi.edu.ua/

У збірнику публікуються наукові статті, у яких висвітлюються актуальні питання в області механічної обробки сучасних матеріалів із застосуванням високопродуктивних технологій, нових методів та вимірювальних приладів для контролю якості оброблених поверхонь і високоефективних різальних інструментів. Висвітлюються аспекти оптимізації й математичного моделювання на різних етапах технологічного процесу.

Рік заснування: 1966. Періодичність: 2 рази на рік. ISSN 2078-7405 (Print)

Новини

Збірник «Різання та інструменти в технологічних системах» включено до Переліку наукових фахових видань України з технічних наук до категорії «Б» згідно Наказу МОН України №409 від 17.03.2020 р.

Переглянути

Фільтри

20222

Налаштування

Автор: search.filters.author.Fedorovich, V.

Результати пошуку

Зараз показуємо 1 - 2 з 2
  • Ескіз
    Документ
    Surface modification of synthetic grinding powders diamond with heat-resistant oxides and chlorides liquid phase application method
    (Національний технічний університет "Харківський політехнічний інститут", 2022) Lavrinenko, V.; Poltoratskiy, V.; Bochechka, O.; Solod, V.; Ostroverkh, Ye.; Fedorovich, V.
    The restrictions to the selection of oxides, which may be interesting in the modification of forging heat-resistant oxides of the surface of diamond grinding powders, are defined. It is shown that the first group of the most efficient applied for modifying the surface of the diamond grinding powders includes the following oxides – B₂O₃, TiO₂, SiO₂ and Al₂O₃. The second group, less effective – ZnO, BaO and CaO. To achieve an additional positive effect from the modification it is possible to consider a double modification of surface of diamond grains with a mixture of oxides of the first group and chloride (СаСl₂, NaCl). The process of grain surface modification of synthetic diamond grinding powders by heat-resistant oxides and chlorides of metals and non-metals by liquid phase application has been studied. The structural characteristics of the external structure have been studied and the quantitative elemental composition of the surface of modified powders has been determined. It is established that to achieve a guaranteed increase in wear resistance of diamond wheels when grinding hard alloys at least 2 times it is recommended to modify the surface of diamond grains with a combination of oxides: B₂O₃ grain surface modification (50 % grain) and Al₂O₃ grain surface modification (50 %).
  • Ескіз
    Документ
    The nature of the formation of surface micro-roughness in vibration finishing and grinding processing
    (Національний технічний університет "Харківський політехнічний інститут", 2022) Mitsyk, A.; Fedorovich, V.
    The main aspects related to the nature of the formation of surface micro-roughness during vibration finishing and grinding processing are given. It is indicated that the material removal from the surface of the part occurs as a result of the combined action of micro-cutting processes, chipping of metal particles during repeated deformation of the processed surface areas, their fatigue and destruction, the formation, destruction and removal of secondary structures, and adhesion phenomena. It is noted that the real surface after vibration treatment is a set of roughnesses of a certain size, shape and direction. It is defined that the micro-roughness of the surface of the part during vibration finishing and grinding is formed in the form of traces from numerous impacts of abrasive granules on the surface of the part. The largest value of the granule penetration into the processed surface is determined, that makes it possible to characterize the trace from plastic compression in the zone of collision between the granule and the part. The technique and study of the mechanism of formation of surface microroughness is considered. An expression is determined for the normal component of the impact force, which characterizes the main effect on the mechanism of micro-roughness formation. The value of penetration of the granule into the metal of the part is determined. The study showed that the surface micro-roughness during vibration treatment is formed by impacts of granules on the part at different meeting angles. The traces from action of straight and oblique impacts are established. The average height of micro-roughness is calculated. According to the hodographs, the normal velocities of abrasive granules and parts are determined. The average value of the angle of impact of the granules with the part at any point of the trajectory of their movement is also determined. It was revealed that the velocities of granules and parts change in magnitude and direction during one period of the reservoir oscillation, reaching their limiting values, which are proportional to the reservoir movement velocities. The degree of proportionality is expressed by the similarity coefficient for the granule and the part. The average similarity coefficient was also determined by the points of the hodograph. The average values of the movement velocities of the granule and the part in the reservoir are obtained. The minimum and maximum value of the granule penetration into the surface of the part is established. The formulas for the limiting values of the granule penetration depth are given, taking into account the coefficient of ellipticity. The results of calculations for determining the height of micro-roughness of the processed part surface are presented. A formula is obtained for determining the surface micro-roughness during vibration finishing and grinding processing.