Asymptotic Solution of Anisotropic Cyclic Creep Problem

Скорочена інформація про документ
dc.contributor.authorBreslavsky, Dmitryen
dc.contributor.authorMietielov, Volodymyren
dc.contributor.authorMorachkovsky, Olegen
dc.contributor.authorTatarinova, Oksanaen
dc.contributor.authorPashchenko, Sergeyen
dc.date.accessioned2016-11-23T09:57:52Z
dc.date.available2016-11-23T09:57:52Z
dc.date.issued2016
dc.description.abstractThin-walled structural elements made from rolled metal usually demonstrate anisotropic creep behavior. Very often the model of transversally-isotropic material is suitable for its description. Due to the difficulties in direct numerical integration the case of cyclic loading demands the development of suitable method of the creep problem’s solution when the material behavior isn’t isotropic. The general problem statement as well as the constitutive equations for two-dimensional creep problem are presented. Transversally-isotropic creep material model developed by O.Morachkovsky is used. The case of substantial stress values which are greater than yield limit is studied. Addition of cyclic loading, which is essentially varying the creep response, is analyzed. Deriving of resolving system of creep equations was performed by use of the method of asymptotic expansions jointly with the method of averaging in a period of stress cycle. This system allows simulation of only the problem of static loading with constitutive equations of special type, in which the values of cyclic parts of loading are included in so-called influence functions. These equations are derived from the general form by use of asymptotic expansions of creep strain functions with further averaging in a period of oscillations. Developed method is realized as an applied C+ + software. The Finite Element Method is used for solution of boundary-value problem jointly with Finite Difference Scheme for initial one. The results of experimental investigations of creep in specimens and plates with holes made from rolled steel are discussed. The anisotropic creep curves in three directions were obtained and constants for creep flow rule were determined. Additional number of experiments was performed for the case of cyclic loading. The comparison between experimental and numerical data shows the satisfactory agreement. Due to this a number of numerical examples for cyclic creep simulation in thin plates were performed and their results are discussed.en
dc.identifier.citationAsymptotic Solution of Anisotropic Cyclic Creep Problem / D. Breslavsky [et al.] // Nonlinear Dynamics–2016 (ND-KhPI2016) : proceedings of 5th International Conference, dedicated to the 90th anniversary of Academician V. L. Rvachev, September 27-30, 2016 = Нелінійна динаміка–2016 : тези доп. 5-ї Міжнар. конф., 27-30 вересня 2016 р. – Kharkov : NTU "KhPI", 2016. – P. 276.en
dc.identifier.urihttps://repository.kpi.kharkov.ua/handle/KhPI-Press/24831en
dc.language.isoen
dc.publisherNTU "KhPI"en
dc.titleAsymptotic Solution of Anisotropic Cyclic Creep Problemen
dc.typeThesisen

Файли

Контейнер файлів
Зараз показуємо 1 - 1 з 1
Ескіз
Назва:
Введ. Breslavsky_Asymptotic_Solution_2016.pdf
Розмір:
19.05 KB
Формат:
Adobe Portable Document Format
Завантажити
Ліцензійна угода
Зараз показуємо 1 - 1 з 1
Ескіз недоступний
Назва:
license.txt
Розмір:
11.21 KB
Формат:
Item-specific license agreed upon to submission
Опис:
Завантажити

Зібрання

Nonlinear Dynamics–2016