Кафедра "Матеріалознавство"

Постійне посилання колекціїhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/6927

Офіційний сайт кафедри http://web.kpi.kharkov.ua/mtrlvd

Від 2007 року кафедра має назву "Матеріалознавство", первісна назва – "Металознавство та термічна обробка металів".

Кафедра "Металознавство та термічна обробка металів" створена у 1932 році. Першим її очільником став доктор технічних наук, професор Олександр Володимирович Терещенко.

Кафедра являє собою одну із найстаріших в політехнічному інституті з підготовки інженерів-технологів-дослідників. Своїми науковими дослідженнями. з початку своєї діяльності, кафедра сприяла розвитку та удосконаленню технологій термічної та хіміко-термічної обробки деталей на підприємствах України».

Кафедра входить до складу Навчально-наукового інституту механічної інженерії і транспорту Національного технічного університету "Харківський політехнічний інститут".

У складі науково-педагогічного колективу кафедри працюють: 1 доктор технічних наук, 9 кандидатів технічних наук, 3 кандидата фізико-математичних наук, 1 доктор філософії; 1 співробітник має звання професора, 8 – доцента, 1 – старшого наукового співробітника.

Переглянути

Результати пошуку

Зараз показуємо 1 - 10 з 10

Вплив тиску та потенціалів зміщення на структуру та властивості нітридних покриттів TiN
(Національний університет цивільного захисту України, 2022) Пінчук, Наталія Володимирівна; Терлецький, Олександр Семенович
Structure and properties of multi-period vacuum-arc coatings based on chromium nitride
(Institute for Single Crystals, 2020) Postelnyk, H. O.; Sobol, O. V.; Kucerova, L.; Dur, Osman
The properties of multi-period nanocomposite coatings based on chromium nitride are considered. The effect of the negative bias potential on the phase-structural state and mechanical characteristics of the coatings was investigated by X-ray diffractometry combined with the study of hardness by nanoindentation, surface roughness and coefficient of friction during scratch testing. It has been established that all the systems are characterized by the formation of a cubic crystal lattice of the structural type NaCl, as well as the effect of texture on hardness values. For the studied coatings, the hardness is in the range of 20-25 GPa. The presence of texture [311] in CrN/MoN nanocomposite coatings leads to the lowest friction coefficient with a value of about 0.2.
Structural engineering and functional properties of vacuum-arc coatings of high-entropy (TiZrNbVHf)N and (TiZrNbVHfTa)N alloys nitrides
(Institute for Single Crystals, 2019) Sobol, O. V.; Dur, Osman; Postelnyk, A. A.
The effect of nitrogen pressure during the deposition of vacuum-arc (TiZrNbVHf)N and (TiZrNbVHfTa)N coatings on their phase-structural state, substructure and resistance to abrasive wear was investigated. It was established that in multi-element (based on high-entropy alloys) (TiZrNbVHf)N and (TiZrNbVHfTa)N coatings obtained in a nitrogen atmosphere in the range of nitrogen pressures PN = 2.5 ·10-4-4.5 ·10-3 Torr, a single-phase state is formed (based on cubic crystal lattice of structural type NaCl). The use of a multi-element composition with a single-phase state with a cubic lattice allows for (Ti-V-Zr-Nb-Hf-Ta)N coatings to achieve high microstrain values (up to 1.2 %) at low deposition pressure. It was found that high-entropy nitride coatings with low abrasive wear are characterized by a crystallite grain size of less than 50 nm, the absence or low level of texture perfection [111], and the presence of a rather high microstrain in crystallites (reaching 1.2 %). The reasons for the observed changes in the structural state and substructure of multi-element nitride coatings and their effect on abrasive resistance are discussed.
The Use of Negative Bias Potential for Structural Engineering of Vacuum-Arc Nitride Coatings Based on FeCoNiCuAlCrV High-Entropy Alloy
(Sumy State University, 2018) Sobol, O. V.; Andreev, A. A.; Gorban, V. F.; Meylekhov, A. A.; Postelnуk, A. A.; Stolbovoy, V. A.; Zvyagolskiy, A. V.
The effect of negative bias potential (Ub = – 40, – 110, and – 200 V) upon the deposition of multielement coatings on their composition, structure, and mechanical properties was studied. It is shown that when using a high-entropy multielement (of 7 elements) FeCoNiCuAlCrV alloy, it is possible to obtain a single-phase nitride (FeCoNiCuAlCrV)N. Nitride has an fcc crystal lattice (structural type NaCl). It has been established that with an increase in Ub in the structural state occurs transition from practically nontextured (polycrystalline) to the preferential orientation of the growth of crystallites with the [111] texture axis (at Ub = – 110 V) and [110] (at Ub = – 200 V). This is accompanied by a decrease in the lattice period, as well as a decrease in hardness and modulus of elasticity. For coatings (FeCoNiCuAlCrV) N, the highest hardness of 38 GPa is achieved by using the smallest (– 40 V) bias potential during the deposition process. It is shown that to achieve high hardness at high Ub it is necessary to increase the content in the highentropy alloy of elements with high nitride-forming ability.
Influence of the Bias Potential and the Pressure of the Nitrogen Atmosphere on the Structure and Properties of Vacuum-arc Coatings Based on the AlCrTiZrNbV High-entropy Alloy
(Sumy State University, 2018) Sobol, O. V.; Andreev, A. A.; Gorban, V. F.; Postelnyk, A. A.; Stolbovoy, V. A.; Zvyagolskiy, A. V.
The effect of the constant bias potential (Ub) supplied to the substrate upon condensation and pressure of the nitrogen atmosphere (PN) on the elemental composition, growth morphology, texture, and physical-mechanical characteristics of vacuum-arc (AlCrTiVZrNb)Nx coatings is studied. It is established that with increasing Ub from – 110V to – 200V, the axis of preferential growth of crystallites of the fcc phase from [100] to [110] changes. Such a change is accompanied by a decrease in the hardness (H) and the ratio H/E (where E is the modulus of elasticity). The conditions for the formation of the preferential orientation of the crystallites (axial texture) of vacuum-arc (AlCrTiVZrNb)Nx coatings and the influence of texture on mechanical properties are discussed. It was established that the change in PN in the range Torr basically allows to vary the degree of filling of the coating with nitrogen atoms. Based on the revealed regularities, the conditions for achieving high hardness for vacuum-arc coatings of nitrides AlCrTiVZrNb high-entropy alloy are substantiated. Because of the presence in the alloy of elements with a relatively low heat of nitride formation, in order to achieve high hardness, it is necessary to use deposition conditions with relatively low energy of bombarding atoms. The use of a low Ub = –110 V at the highest pressure Torr allows achieving an superhard state with a hardness of 44 GPa.
The Influence of Layer Thickness and Deposition Conditions on Structural State of NbN/Cu Multilayer Coatings
(Sumy State University, 2019) Sobol, O. V.; Andreev, A. A.; Meylekhov, A. A.; Postelnyk, A. A.; Stolbovoy, V. A.; Ryshchenko, I. M.; Sagaidashnikov, Yu. Ye.; Kraievska, Zh. V.
The influence of the main physical and technological factors of structural engineering (layer thickness, nitrogen atmosphere pressure and bias potential) on the structural-phase state of the NbN/Cu coatings was studied. It was established that with an increase in the thickness of niobium nitride layers from 8 to 40 nm (in the NbN/Cu multilayer composition), the phase composition changes from the metastable NbN (cubic crystal lattice, NaCl structural type) to the equilibrium ε-NbN phase with a hexagonal crystal lattice. At low pressure PN = 7·10 – 4 Torr in thin layers (about 8 nm thick), regardless of the Ub, the NbN phase is formed. The reason for the stabilization of this phase can be the uniformity of the metallic fcc crystal lattice of the δ-NbN phase with the Cu crystal lattice. As the pressure increases from РN = 7·10 – 4 Torr to 3·10 – 3 Torr, a more equilibrium ε-NbN phase with a hexagonal crystal lattice is formed. An increase in the bias potential during deposition from – 50 V to – 200 V mainly affects the change in the preferred orientation of crystallite growth. In thin layers of the NbN phase (about 8 nm), a crystallite texture with the [100] axis is formed. In layers with a thickness of 40-120 nm, crystallites of the NbN phase are predominantly formed with a hexagonal (004) plane parallel to the growth plane. At the greatest layer thickness (more than 250 nm), the NbN phase crystallites are predominantly formed with a (110) hexagonal lattice plane parallel to the growth plane. The results obtained show great potential for structural engineering in niobium nitride when it is used as a constituent layer of the NbN/Cu multilayer periodic system.
А Computer Simulation of Radiation-Induced Structural Changes and Properties of Multiperiod ZrNₓ/MoNₓ System
(Sumy State University, 2017) Sobol, O. V.; Meylekhov, A. A.; Bochulia, T. V.; Stolbovoy, V. A.; Gorban, V. F.; Postelnyk, A. A.; Shevchenko, S. M.; Yanchev, A. V.
Influence of the period value Λ (at different negative potential Ub that supplied during deposition) on phase composition, structure, stress-strain state and hardness of multiperiod coatings ZrNₓ/MoNₓ is investigated by using complex methods of validation structural state at combined with microindentation. Formation in layers ZrNx and MoNx the phases with cubic lattice and preferred orientation of crystallites with axis [100] is established. Stress-strain state of compression with increasing Ub is amplified and reaches maximum value (– 6.7 GPa) at Λ = 20 nm and Ub – 110 V. Hardness of coating increases with decreasing Λ from 300 to 20 nm. Coatings that obtained with Λ = 20 nm and Ub – 110 V have the highest hardness 44 GPa. Relaxation of structural compressive stresses and decreasing hardness is happening at smaller Λ and larger Ub – 110 V (as a result of radiation-stimulated forming defect and mixing). Data of computer modeling of defectiveness at atomic level at bombardment of ions that accelerated in field Ub are used to explain the results.
Structure and Properties of Vacuum Arc Single-Layer and Multiperiod Two-Layer Nitride Coatings Based on Ti(Al):Si Layers
(Sumy State University, 2017) Beresnev, V. M.; Sobol, O. V.; Pogrebnjak, A. D.; Lytovchenko, S. V.; Stolbovoy, V. A.; Srebniuk, P. A.; Novikov, V. Ju.; Doshchechkina, I. V.; Meylehov, A. A.; Postelnyk, A. A.; Nyemchenko, U. S.; Mazylin, B. A.; Kruhlova, V. V.
The paper provides an analysis of impact of deposition conditions on structural and phase state and thermal stability of vacuum arc coatings based on Ti(Al):Si layers. We studied single-phase single-layer coatings, and multiperiod bilayer coatings with second phase nitride interlayers of one of the following three metals: Mo, Cr or Zr. It was established that hexagonal and cubic lattices may form in the coatings when transition to the cubic lattice occurs with Al content of about 25 at. %. Presence of second nanoscale (7-8 nm) layers in bilayer multiperiod compositions, which consist of one nitride from CrNx, MoNx or ZrNx group, does not change the type of lattice in [Ti(Al):Si]Nx layers. Also, an fcc lattice with a strong or weak texture [111] forms in CrNx and ZrNx layers, while crystallites with hexagonal lattice form in MoNx layers. High-temperature annealing at 700 °С during 40 minutes leads to a significant (by 23 % or up to H 47.56 GPa) increase in microhardness of coating of the [Ti(Al)]Nx/ZrNy system due to formation of a nano-size structure with an average size of crystallites of 3.6 nm in [Ti(Al)]Nx layers, and 6.3 nm in ZrNx layers.
Structural engineering of NbN/Cu multilayer coatings by changing the thickness of the layers and the magnitude of the bias potential during deposition
(2019) Sobol, O. V.; Andreev, A. A.; Stolbovoy, V. A.; Kolesnikov, D. A.; Kovaleva, M. G.; Meylekhov, A. A.; Postelnyk, H. O.; Dolomanov, A. V. ; Sagaidashnikov, Yu. Ye.; Kraievska, Zh. V.
To determine the patterns of structural engineering of vacuum-arc coatings based on niobium nitride in the NbN/Cu multilayer composition, the effect of layer thickness and bias potential on the structural-phase state and physico-mechanical characteristics of vacuum-arc coatings was studied. It was found that the metastable δ-NbN phase (cubic crystal lattice, structural type NaCl) is formed in thin layers (about 8 nm thick) regardless of Ub. With a greater thickness of the layers of niobium nitride (in the multilayer NbN/Cu composition), the phase composition changes from metastable δ-NbN to the equilibrium ε-NbN phase with a hexagonal crystal lattice. An increase in the bias potential during deposition from -50 to -200 V mainly affects the change in the preferential orientation of crys-tallite growth. The highest hardness (28.2 GРa) and adhesive resistance is achieved in coatings obtained at Ub = -200 V with the smallest layer thickness. The highest hardness corresponds to the structurally deformed state in which the crystallite texture is formed with the [100] axis perpendicular to the growth surface, as well as a large microstrain (1.5%) in crystallites.
Structure and mechanical properties of nitride multilayer systems on the basis of high entropy alloys and transition metals of group VI
(2016) Nyemchenko, U. S.; Beresnev, V. M.; Sobol, O. V.; Lytovchenko, S. V.; Stolbovoy, V. A.; Novikov, V. Ju.; Meylekhov, A. A.; Postelnyk, A. A.; Kovaleva, M. G.
The influence of technological parameters of obtaining on the possibilities of structural engineering and mechanical properties of multilayer compositions of the layers of nitrides of high entropy alloy Ti-Zr-Nb-Ta-Hf and of transition metal (Group IV) nitrides has been analysed. It is shown that with the bias potential Ub lesser than -150 V was applied to the substrate during deposition, a two-phase state with the preferred orientation of the crystallites can be reached in multilayer coatings with the thickness of the layers of 50 nm. This leads to high hardness (up to 44 GPa) and to high adhesion strength (critical load up to 125 N) as well as to low wear (with a counterbody Al ₂O₃, and with steel Ac100Cr6). High-temperature annealing (700 ⁰C) of such coatings leads to enhanced texture as a result of atomic ordering, which is accompanied by increasing of hardness up to 59 GPa. The supply of bias potential exceeding 150 V, followed by a substantial mixing at the interphase boundary results in disorientation and improves dispersion of the crystallites, reduces hardness and wear resistance. High temperature annealing of such structures leads to reduction of their mechanical properties.