Різання та інструменти в технологічних системах

Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/62923

У збірнику публікуються наукові статті, у яких висвітлюються актуальні питання в області механічної обробки сучасних матеріалів із застосуванням високопродуктивних технологій, нових методів та вимірювальних приладів для контролю якості оброблених поверхонь і високоефективних різальних інструментів. Висвітлюються аспекти оптимізації й математичного моделювання на різних етапах технологічного процесу.

Рік заснування: 1966. Періодичність: 2 рази на рік. ISSN 2078-7405 (Print)

Новини

Збірник «Різання та інструменти в технологічних системах» включено до Переліку наукових фахових видань України з технічних наук до категорії «Б» згідно Наказу МОН України №409 від 17.03.2020 р.

Переглянути

Результати пошуку

Зараз показуємо 1 - 4 з 4

Purpose and technological properties of granular media for vibration finishing and grinding processing
(Національний технічний університет "Харківський політехнічний інститут", 2023) Mitsyk, Аndrii ; Fedorovich, Vladimir; Ostroverkh, Yevgeniy
The purpose and characteristics of granular working media used in vibration processing operations are given. It is indicated that the purpose of granular media is their contact interaction with the processed part surface under conditions of various energy parameters. This interaction is accompanied by elastic-plastic deformation, micro-cutting, adhesion and mechanic-chemical processes. Indicators of technological and operational properties for various types of granular media are given, including the intensity of material removal from the processed surface, cutting ability, wear resistance and achieved surface roughness. The physical and technological parameters of granular media have been established, including deformability, hardness during finishing and hardening operations and surface roughness of the media granules. The influence of the parameters of processing media granules on the productivity of vibration treatment has been determined. It is shown that such parameters are the binding of the granules material, its wear resistance, grain material, granulation and the shape of individual granules. It is noted that the choice of granule sizes depends on two main factors such as: the necessity to obtain a given roughness and high productivity of vibration operations. It was revealed that to ensure high surface cleanliness, the use of small granules of the medium is required, but to obtain high productivity, the use of large granules is required. Approximate dependencies have been determined that relate the size and weight of granules of the processing medium and the processed parts. It is indicated that the best results in achieving high quality of the processed surface and sufficient productivity are provided by granular media with a shape close to a sphere. It is noted that granules in the form of cones, pyramids, prisms and other forms are used for the successful processing of hard-to-reach places in the form of small holes, straight and sharp angles in the interface of the surface of parts, niches or pockets. Such granules are specially manufactured from a mixture of grinding powders of various grain sizes and an inorganic binder based on clays. The features of the physical and technological parameters of processing media are given.
Topographic adaptability in the diamond grinding zone of superhard materials
(Національний технічний університет "Харківський політехнічний інститут", 2023) Fedorovich, Vladimir; Ostroverkh, Yevgeniy; Romashov, Dmitry
A comprehensive theoretical and experimental analysis of technological topographic adaptability is carried out, based on an idealized description of the topographic parameters of the working surface of the grinding wheel, their changes during its wear and experimental laser scanning of the working surface of the grinding wheel and the processed superhard material (SHM). It has been established that the protrusion height of diamond grains affects the intensity of destruction (removal) of stock through a change in the number of working grains and the actual contact area of the SHM with the working part of the grinding wheel surface. In a controlled grinding process, it is possible to stabilize the working height of the grains in any of the 3 stages of their wear intensity, equating this intensity with the intensity of removal of the intergranular bond. A method has been developed for determining the actual contact area of the working surface of the grinding wheel and changing its technological adaptability. It has been established that in the process of topographic adaptability, the actual contact area can change by several orders of magnitude, respectively, the specific pressure at the contact of diamond grains with the SHM will change, and, consequently, the nature and intensity of their mutual destruction.
Regularities of vibration finishing and grinding processing and directions of improvement of its intensity and quality
(Національний технічний університет "Харківський політехнічний інститут", 2023) Mitsyk, Аndrii; Fedorovich, Vladimir
The data on the labor intensity of manufacturing engineering products and the share of finishing and grinding operations in the total labor costs of their manufacture are presented. The list and the degree of mastering the technological operations of finishing and grinding processing, performed in the conditions of machine-building industries during the last years are given. The grounds are given for highlighting the method of vibration processing as the most promising for ensuring complete mechanization of the process of finishing and cleaning, as well as achieving high technological characteristics of the surface roughness of parts. An assessment was made of the influence of modes, the trajectory of the movement of the reservoir and the grain size of the granules of the abrasive medium on metal removal. It is indicated that the intensity and quality of vibration treatment is estimated quantitatively by the weight removal of metal and qualitatively by the roughness of the processed surface. It is indicated that the determining factor in this case is the speed of the oscillating movement of granules and parts, the difference of which represents the speed of vibration processing, depending on the speed of the oscillating movement of the medium. It is noted that in order to increase the productivity of the process, it is necessary to increase the speed of the medium by increasing the frequency and amplitude of the reservoir oscillations. The layer-by-layer transmission of a force impulse from the bottom of the reservoir to the bulk medium is considered. The physical meaning of increasing productivity by increasing the amplitude of the reservoir oscillations is indicated. The conditions for obtaining metal removal are indicated, which provide increased efforts for the interaction of granules with parts at high micro-cutting speeds. Experimental studies are described to determine the influence of the amplitude and frequency of oscillations on the results of vibration finishing and grinding. Graphic dependences of metal removal were obtained for various ratios of the sample weight to the weight of the medium granule. The dependence of metal removal on the ellipticity coefficient and the amplitude of the reservoir oscillations was obtained in a similar way. It is noted that the vertical component of the amplitude during in-plane oscillations of the reservoir is the determining factor of the complex influence of the parameters of the ellipse coefficient of the trajectory of the reservoir and its amplitude of oscillations. It has been established that when using a coarse-grained abrasive, the penetration of grains into the metal of the part occurs to a greater depth and larger metal chips are removed with a large metal removal. With a small grain size of the abrasive, small chips are removed with a small metal removal and a decrease in the height of micro-roughness.
Modern developments related to the directed impact on the cutting surface of a diamond abrasive tool and its contact zone in the processes of machining (review)
(Національний технічний університет "Харківський політехнічний інститут", 2023) Lavrinenko, Valerii; Fedorovich, Vladimir; Ostroverkh, Yevgeniy; Solod, Volodymyr
This article provides information on modern developments in the direction of directed impact on the cutting surface of a diamond-abrasive tool and its contact zone in machining processes. For the most part, such processing is faced with issues of influence on the cutting surface of diamond tools, including ruling mechanical and electrophysical, taking into account the defectiveness of the diamonds that undergo processing, the directed influence on the surface of such diamonds, thermal and modification of the surface of diamonds. Such developments make it possible to significantly intensify processing processes and increase the efficiency of the diamond abrasive tool. That is why, in this review, the main attention is paid to the presentation of modern developments, known from scientific publications, mainly for the last 5 years, related to the above-mentioned issues.