Devising a method to improve the accuracy of maintaining the preset temperature and humidity conditions at a vegetable storage facility under a food storing mode

Скорочена інформація про документ
dc.contributor.authorKachanov, P. O.en
dc.contributor.authorYevseienko, O. M.en
dc.contributor.authorYevsina, N. O.en
dc.date.accessioned2023-11-15T18:37:55Z
dc.date.available2023-11-15T18:37:55Z
dc.date.issued2021
dc.description.abstractA vegetable storage facility is an energy-consuming object with distributed parameters. The quality of product storage depends on the microclimate in the vegetable storage facility: current temperature, humidity, and carbon dioxide level. Existing temperature controllers in a veg etable storage facility use a two-position law of control, which leads to the consumption of excess energy and product spoilage. The purpose of the study is to improve the work of the controller in the process of product storage at the storage phase due to closing the two-position controller through feedback in the form of a first-order aperiodic link. To achieve the goal, the procedure for calculating the transfer function of a control object through the equation of thermal balance was used. This procedure made it possible to take into consideration the parameters of a vegetable storage facility: the area and the type of thermal insulation material of floorings, the weight, and the type of a stored product, as well as thermal energy supplied to the vegetable storage facility.Based on the heat balance equation, the nature of the operation of controlling elements, transfer functions of a vegetable storage facility without a product, and the vegetable storage facility filled with a product, were calculated. The heat model of a vegetable storage facility was constructed in the MATLAB Simulink environment (USA) to check the algorithms of the temperature field control. The product storage for 180 days with changes in the daily temperature of outdoor air from minus 8 °C to plus 2 °C and changes in humidity from 50 % to 100 % was modeled. According to the results of modeling, it is possible to conclude that the addition of an aperiodic link to the feedback of the two-position controller will enable taking into consideration the inertia of a control object. This allows decreasing the maximum error in control of self-oscillations to 0.15 °C and decreasing the total operation time of con trolling elements by 13 %en
dc.identifier.citationKachanov, P. Devising a method to improve the accuracy of maintaining the preset temperature and humidity conditions at a vegetable storage facility under a food storing mode / P. Kachanov., O. Yevseienko, N. Yevsina // Eastern-European Journal of Enterprise Technologies = Східно-Європейський журнал передових технологій. – 2021. – Vol. 2, iss. 2 (110). – P. 89–98.en
dc.identifier.doihttps://doi.org/10.15587/1729-4061.2021.229844
dc.identifier.urihttps://repository.kpi.kharkov.ua/handle/KhPI-Press/70798
dc.language.isoen
dc.publisherРС Теshnology Сentеren
dc.subjectcontrol systemen
dc.subjectvegetable storage facilityen
dc.subjecttemperature stabilizationen
dc.subjectmicroclimateen
dc.subjectmathematical modelen
dc.subjectvegetable storageen
dc.titleDevising a method to improve the accuracy of maintaining the preset temperature and humidity conditions at a vegetable storage facility under a food storing modeen
dc.typeArticleen

Файли

Контейнер файлів
Зараз показуємо 1 - 1 з 1
Ескіз
Назва:
EEJ_2021_2_2_Kachanov_ Devising_a_method.pdf
Розмір:
3.44 MB
Формат:
Adobe Portable Document Format
Завантажити
Ліцензійна угода
Зараз показуємо 1 - 1 з 1
Ескіз недоступний
Назва:
license.txt
Розмір:
11.25 KB
Формат:
Item-specific license agreed upon to submission
Опис:
Завантажити

Зібрання

Кафедра "Автоматика та управління в технічних системах"