Some features of the surface micro- and macroprofile formation at flat face grinding with spindle axis inclination

Скорочена інформація про документ
dc.contributor.authorKundrák, Jánoshu
dc.contributor.authorFedorovich, Vladimiren
dc.contributor.authorPyzhov, Ivanen
dc.contributor.authorMarkopoulos, Angelosen
dc.contributor.authorKlimenko, Vitalyen
dc.date.accessioned2016-06-29T08:04:14Z
dc.date.available2016-06-29T08:04:14Z
dc.date.issued2015
dc.description.abstractThe work described in this paper pertains to the identification of some features of microand macroprofile formation of surfaces to be machined with flat face grinding, with inclination of the spindle axis. The question of the formation of machined surface profile at through-feed grinding and multiple-pass scheme are considered by using computer-aided simulations in COMPASS environment. More specifically, for flat face through-feed grinding, a generalized empirical equation exhibiting the dependency of concavity from the outer diameter of the face grinding wheel, the spindle axis inclination angle and the width of the surface of the workpiece is acquired. Furthermore, based on the maximum allowable value of flatness deviation and with pre-determined grinding wheel diameter and workpiece width, it is possible to identify the maximum inclination angle at which concavity falls within acceptable limits. For the case of multiple pass flat face grinding, the role of factors such as inclination angle of spindle axis, cross-feed and diameter of the grinding wheel on the height of residual ridges on the surface of the parts is determined through the proposal of an empirical equation. With the aforementioned equations the machinist may reasonably prescribe machining conditions in practice. The conducted research contributes to the expansion of ideas regarding technological possibilities of improvement of flat face grinding.en
dc.identifier.citationSome features of the surface micro- and macroprofile formation at flat face grinding with spindle axis inclination / J. Kundrák [et al.] // Applied Mechanics and Materials. – 2015. – Vol. 809-810. – P. 45-50.en
dc.identifier.doi10.4028/www.scientific.net/AMM.809-810.45
dc.identifier.urihttps://repository.kpi.kharkov.ua/handle/KhPI-Press/22345
dc.language.isoen
dc.publisherTrans Tech Publications Inc.en
dc.subjectflat face grindingen
dc.subjectspindle inclination angleen
dc.subjectgrinding wheelen
dc.subjectline feeden
dc.subjectcomputeraided simulationen
dc.subjectflatness erroren
dc.subjectconcavityen
dc.subjectmacroprofileen
dc.subjectresidual ridgeen
dc.titleSome features of the surface micro- and macroprofile formation at flat face grinding with spindle axis inclinationen
dc.typeArticleen

Файли

Контейнер файлів
Зараз показуємо 1 - 1 з 1
Ескіз
Назва:
AMM_2015_809-810_Kundrak_Some.pdf
Розмір:
413.22 KB
Формат:
Adobe Portable Document Format
Завантажити
Ліцензійна угода
Зараз показуємо 1 - 1 з 1
Ескіз недоступний
Назва:
license.txt
Розмір:
11.23 KB
Формат:
Item-specific license agreed upon to submission
Опис:
Завантажити

Зібрання

Кафедра "Інтегровані технології машинобудування ім. М. Ф. Семка"