Examination of residual stresses on diamond burnished cylindrical surfaces

Скорочена інформація про документ
dc.contributor.authorVarga, Gyulaen
dc.contributor.authorFerencsik, Viktoriaen
dc.date.accessioned2017-09-14T07:49:51Z
dc.date.available2017-09-14T07:49:51Z
dc.date.issued2017
dc.description.abstractCold plastic finish manufacturing methods such as surface rolling, burnishing and surface hardening with shot peening play important role in the lifetime increasing manufacturing as compressive residual stress remains in near surface layers of the workpiece. This paper deals with examination of changing of residual stress caused by burnishing using diamond tipped tools. The diamond burnishing executed on outer cylindrical surfaces is a finishing manufacturing operation which results high accuracy and fine surface texture. The aim of the examinations was to determine how the burnishing speed, feed rate and burnishing force has affect on the residual stresses in case of diamond burnishing of low alloyed aluminium shafts. The Taguchi type Factorial experiment design was used for planning of experiments. The measurement of residual stresses was performed by an X-ray diffraction method. The evaluation of measured results was done by a specially specified ratio to determine the parameter set which results the best residual stress values in between the given range of technological parameters.en
dc.identifier.citationVarga G. Examination of residual stresses on diamond burnished cylindrical surfaces / G. Varga, V. Ferencsik // Резание и инструменты в технологических системах = Cutting & tools in technological systems : междунар. науч.-техн. сб. – Харьков : НТУ "ХПИ", 2017. – Вып. 87. – С. 18-27.en
dc.identifier.urihttps://repository.kpi.kharkov.ua/handle/KhPI-Press/31231
dc.language.isoen
dc.publisherНТУ "ХПИ"en
dc.subjectsurface roughnessen
dc.subjectstressen
dc.subjectmethoden
dc.subjectX-rayen
dc.titleExamination of residual stresses on diamond burnished cylindrical surfacesen
dc.typeArticleen

Файли

Контейнер файлів
Зараз показуємо 1 - 1 з 1
Ескіз
Назва:
RITS_2017_ 87_Varga_Examination.pdf
Розмір:
861.14 KB
Формат:
Adobe Portable Document Format
Опис:
Завантажити
Ліцензійна угода
Зараз показуємо 1 - 1 з 1
Ескіз недоступний
Назва:
license.txt
Розмір:
11.23 KB
Формат:
Item-specific license agreed upon to submission
Опис:
Завантажити

Зібрання

Кафедра "Інтегровані технології машинобудування ім. М. Ф. Семка"