Кафедра "Матеріалознавство"

Постійне посилання колекціїhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/6927

Офіційний сайт кафедри http://web.kpi.kharkov.ua/mtrlvd

Від 2007 року кафедра має назву "Матеріалознавство", первісна назва – "Металознавство та термічна обробка металів".

Кафедра "Металознавство та термічна обробка металів" створена у 1932 році. Першим її очільником став доктор технічних наук, професор Олександр Володимирович Терещенко.

Кафедра являє собою одну із найстаріших в політехнічному інституті з підготовки інженерів-технологів-дослідників. Своїми науковими дослідженнями. з початку своєї діяльності, кафедра сприяла розвитку та удосконаленню технологій термічної та хіміко-термічної обробки деталей на підприємствах України».

Кафедра входить до складу Навчально-наукового інституту механічної інженерії і транспорту Національного технічного університету "Харківський політехнічний інститут".

У складі науково-педагогічного колективу кафедри працюють: 1 доктор технічних наук, 9 кандидатів технічних наук, 3 кандидата фізико-математичних наук, 1 доктор філософії; 1 співробітник має звання професора, 8 – доцента, 1 – старшого наукового співробітника.

Переглянути

Результати пошуку

Зараз показуємо 1 - 10 з 14

Influence of Bias Potential Magnitude on Structural Engineering of ZrN-Based Vacuum-Arc Coatings
(Vasyl Stefanyk Precarpathian National University, 2021) Sobol, O. V.; Postelnyk, H. O.; Pinchuk, N. V.; Meylekhov, A. A.; Zhadko, M. A.; Andreev, A. A.; Stolbovoy, V. A.
The creation of the scientific foundations for the structural engineering of ultrathin nanolayers in multilayer nanocomposites is the basis of modern technologies for the formation of materials with unique functional properties. It is shown that an increase in the negative bias potential (from -70 to -220 V) during the formation of vacuum-arc nanocomposites based on ZrN makes it possible not only to control the preferred orientation of crystallites and substructural characteristics, but also changes the conditions for conjugation of crystal lattices in ultrafine (about 8 nm) nanolayers.
Formation of Superhard State of the TiZrHfNbTaYN Vacuum–Arc High-Entropy Coating
(Allerton Press, Inc., 2018) Beresnev, V. M.; Sobol, O. V.; Andreev, A. A.; Gorban, V. F.; Klimenko, S. A.; Litovchenko, S. V.; Kovteba, D. V.; Meilekhov, A. A.; Postelnyk, A. A.; Nemchenko, U. S.; Novikov, V. Yu.; Maziilin, B. A.
Complex studies of the formation of the superhard state in the TiZrHfNbTaYN vacuum-arc high-entropy coating were carried out. Based on the approach of the structural surface engineering, the regularities of the formation of the triads composition–structure–physico-mechanical properties depending on the supplied potential displacement are established. It is shown that the increase of Ub at the formation of a coating leads to a decrease of the relative content of a light (Ti) and increase of a heavy (Ta, Hf) metal components, which is determined by radiationally stimulated processes in a near surface region at the deposition. The formation of the single-phase state (based on the fcc of metal lattice) in the range Ubfrom –50 to –250 V and revealed the formation of the preferred orientation of the crystallites with the axis [111], which is perpendicular to the growth plane. The increase of the perfection of the texture with the [111] axis with increasing Ub is accompanied with an increase of the coatings hardness, which makes it possible to achieve the superhard state (H = 40.2 GPa) at Ub = –250 V.
The Use of Negative Bias Potential for Structural Engineering of Vacuum-Arc Nitride Coatings Based on FeCoNiCuAlCrV High-Entropy Alloy
(Sumy State University, 2018) Sobol, O. V.; Andreev, A. A.; Gorban, V. F.; Meylekhov, A. A.; Postelnуk, A. A.; Stolbovoy, V. A.; Zvyagolskiy, A. V.
The effect of negative bias potential (Ub = – 40, – 110, and – 200 V) upon the deposition of multielement coatings on their composition, structure, and mechanical properties was studied. It is shown that when using a high-entropy multielement (of 7 elements) FeCoNiCuAlCrV alloy, it is possible to obtain a single-phase nitride (FeCoNiCuAlCrV)N. Nitride has an fcc crystal lattice (structural type NaCl). It has been established that with an increase in Ub in the structural state occurs transition from practically nontextured (polycrystalline) to the preferential orientation of the growth of crystallites with the [111] texture axis (at Ub = – 110 V) and [110] (at Ub = – 200 V). This is accompanied by a decrease in the lattice period, as well as a decrease in hardness and modulus of elasticity. For coatings (FeCoNiCuAlCrV) N, the highest hardness of 38 GPa is achieved by using the smallest (– 40 V) bias potential during the deposition process. It is shown that to achieve high hardness at high Ub it is necessary to increase the content in the highentropy alloy of elements with high nitride-forming ability.
Influence of the Bias Potential and the Pressure of the Nitrogen Atmosphere on the Structure and Properties of Vacuum-arc Coatings Based on the AlCrTiZrNbV High-entropy Alloy
(Sumy State University, 2018) Sobol, O. V.; Andreev, A. A.; Gorban, V. F.; Postelnyk, A. A.; Stolbovoy, V. A.; Zvyagolskiy, A. V.
The effect of the constant bias potential (Ub) supplied to the substrate upon condensation and pressure of the nitrogen atmosphere (PN) on the elemental composition, growth morphology, texture, and physical-mechanical characteristics of vacuum-arc (AlCrTiVZrNb)Nx coatings is studied. It is established that with increasing Ub from – 110V to – 200V, the axis of preferential growth of crystallites of the fcc phase from [100] to [110] changes. Such a change is accompanied by a decrease in the hardness (H) and the ratio H/E (where E is the modulus of elasticity). The conditions for the formation of the preferential orientation of the crystallites (axial texture) of vacuum-arc (AlCrTiVZrNb)Nx coatings and the influence of texture on mechanical properties are discussed. It was established that the change in PN in the range Torr basically allows to vary the degree of filling of the coating with nitrogen atoms. Based on the revealed regularities, the conditions for achieving high hardness for vacuum-arc coatings of nitrides AlCrTiVZrNb high-entropy alloy are substantiated. Because of the presence in the alloy of elements with a relatively low heat of nitride formation, in order to achieve high hardness, it is necessary to use deposition conditions with relatively low energy of bombarding atoms. The use of a low Ub = –110 V at the highest pressure Torr allows achieving an superhard state with a hardness of 44 GPa.
The Influence of Layer Thickness and Deposition Conditions on Structural State of NbN/Cu Multilayer Coatings
(Sumy State University, 2019) Sobol, O. V.; Andreev, A. A.; Meylekhov, A. A.; Postelnyk, A. A.; Stolbovoy, V. A.; Ryshchenko, I. M.; Sagaidashnikov, Yu. Ye.; Kraievska, Zh. V.
The influence of the main physical and technological factors of structural engineering (layer thickness, nitrogen atmosphere pressure and bias potential) on the structural-phase state of the NbN/Cu coatings was studied. It was established that with an increase in the thickness of niobium nitride layers from 8 to 40 nm (in the NbN/Cu multilayer composition), the phase composition changes from the metastable NbN (cubic crystal lattice, NaCl structural type) to the equilibrium ε-NbN phase with a hexagonal crystal lattice. At low pressure PN = 7·10 – 4 Torr in thin layers (about 8 nm thick), regardless of the Ub, the NbN phase is formed. The reason for the stabilization of this phase can be the uniformity of the metallic fcc crystal lattice of the δ-NbN phase with the Cu crystal lattice. As the pressure increases from РN = 7·10 – 4 Torr to 3·10 – 3 Torr, a more equilibrium ε-NbN phase with a hexagonal crystal lattice is formed. An increase in the bias potential during deposition from – 50 V to – 200 V mainly affects the change in the preferred orientation of crystallite growth. In thin layers of the NbN phase (about 8 nm), a crystallite texture with the [100] axis is formed. In layers with a thickness of 40-120 nm, crystallites of the NbN phase are predominantly formed with a hexagonal (004) plane parallel to the growth plane. At the greatest layer thickness (more than 250 nm), the NbN phase crystallites are predominantly formed with a (110) hexagonal lattice plane parallel to the growth plane. The results obtained show great potential for structural engineering in niobium nitride when it is used as a constituent layer of the NbN/Cu multilayer periodic system.
Structural Engineering of the Multilayer Vacuum Arc Nitride Coatings Based on Ti, Cr, Mo and Zr
(Sumy State University, 2017) Sobol, O. V.; Postelnyk, A. A.; Meylekhov, A. A.; Andreev, A. A.; Stolbovoy, V. A.; Gorban, V. F.
The possibilities of structural engineering of multi-period vacuum-arc coatings based on nitrides of transition metals Ti, Cr, Mo, and Zr have been investigated by structural studies (X-ray diffraction and electron microscopy) in combination with measurement of hardness by indentation. The formation of phases with a cubic crystal lattice under nonequilibrium conditions under vacuum arc method of production. The supply of a negative bias potential of – 200V in mononitrides leads to the predominant formation of texture of crystallites with the [111] axis. The introduction of thin (about 10 nm) metal layers leads to a decrease in texture perfection [111] and texture formation [100]. This effect is associated with a change in the stress-strain state of nitride layers. It is determined that the composite multiperiod coatings (Me1N/Me2N)/(Me1/Me2) have a greater hardness and greater resistance compared to MeN/Me. For a multiperiod system with damping metal layers – (ZrN/CrN)/(Zr/Cr), superhard coatings with a hardness of 46 GPa were obtained.
Structural engineering of NbN/Cu multilayer coatings by changing the thickness of the layers and the magnitude of the bias potential during deposition
(2019) Sobol, O. V.; Andreev, A. A.; Stolbovoy, V. A.; Kolesnikov, D. A.; Kovaleva, M. G.; Meylekhov, A. A.; Postelnyk, H. O.; Dolomanov, A. V. ; Sagaidashnikov, Yu. Ye.; Kraievska, Zh. V.
To determine the patterns of structural engineering of vacuum-arc coatings based on niobium nitride in the NbN/Cu multilayer composition, the effect of layer thickness and bias potential on the structural-phase state and physico-mechanical characteristics of vacuum-arc coatings was studied. It was found that the metastable δ-NbN phase (cubic crystal lattice, structural type NaCl) is formed in thin layers (about 8 nm thick) regardless of Ub. With a greater thickness of the layers of niobium nitride (in the multilayer NbN/Cu composition), the phase composition changes from metastable δ-NbN to the equilibrium ε-NbN phase with a hexagonal crystal lattice. An increase in the bias potential during deposition from -50 to -200 V mainly affects the change in the preferential orientation of crys-tallite growth. The highest hardness (28.2 GРa) and adhesive resistance is achieved in coatings obtained at Ub = -200 V with the smallest layer thickness. The highest hardness corresponds to the structurally deformed state in which the crystallite texture is formed with the [100] axis perpendicular to the growth surface, as well as a large microstrain (1.5%) in crystallites.
The use of negative bias potential for structural engineering of vacuum-arc nitride coatings based on high-entropy alloys
(2019) Sobol, O. V.; Andreev, A. A.; Gorban, V. F.; Postelnyk, H. O.; Stolbovoy, V. A.; Zvyagolsky, A. V.; Dolomanov, A. V.; Kraievska, Zh. V.
The effect of negative bias potential (Ub = -40, -110, and -200 V) during the deposition of multi-element coatings on their composition, structure and mechanical properties was studied. It was established that during the transition from a multi-element alloy to a nitride, a single-phase state possible to form on its basis (based on the fcc metal lattice, structural type NaCl). In this case, the composition (FeCoNiCuAlCrV)N of coatings with increasing Ub is depleted by the element with the lowest enthalpy of formation of nitride (Cu). In (AlCrTiNbSi)N and (AlCrTiZrNbV)N coatings, the content of low-mass elements (Si and Al) decreases with increasing Ub. In (TiZrHfVNb)N coatings of strong nitride-forming elements with increasing Ub to 200 V, the composition practically does not change. The structure of such coatings is characterized by the presence of a texture with the [111] axis. The presence of weak nitride-forming elements in (FeCoNiCuAlCrV)N coatings leads to the formation of texture [110] for large Ub = 110…200 V. In such coatings, the hardness does not exceed 35 GPa. It is shown that to achieve high hardness at high Ub it is necessary to increase the content in the high-entropy alloy of elements with high nitride-forming ability. In this case, in (TiZrHfVNb)N coatings (made of strong nitride-forming elements with a large mass) at Ub = 200 V, the hardness exceeds 45 GPa.
The use of plasma-based deposition with ion implantation technology to produce superhard molybdenum-based coatings in a mixed (C2H2+N2) atmosphere
(2018) Sobol, O. V.; Andreev, A. A.; Mygushchenko, R. P.; Beresnev, V. M.; Meylekhov, A. A.; Postelnyk, A. A.; Kravchenko, S. A.; Tabaza, Taha. A.; Al-Qawabah, Safwan M.; Al-Qawabeha, Ubeidulla F.; Stolbovoy, V. A.; Serdyuk, I. V.; Kolesnikov, D. A.; Kovaleva, M. G.
The influence of the pressure of a mixed gaseous atmosphere (80%C2H2+20%N2) and the supply of a high-voltage negative potential in a pulsed form on the elemental and phase composition, structure and physico-mechanical characteristics of the vacuum-arc molybdenum-based coatings. It is shown that in the temperature deposition range 400…550 °С as a result of plasma-chemical reactions, the maximum nitrogen atoms content in the coating does not exceed 1.5 at.%. It is found, that at the maximum pressure of РC2H2+N2= 2.3∙10-1 Pа when the γ-MoC phase is formed, an superhard state of 50.5 GPa (at a constant potential -200 V, without additional high-voltage pulse action) and 51.1 GPa (at a constant potential -200 V, with additional high-voltage pulse action) is reached.
The effect of the substrate potential during deposition on the structure and properties of the binanolayer multiperiod composites (TiAlSi)N/MeN (Me – Zr, Nb, Cr, Mo)
(2018) Sobol, O. V.; Andreev, A. A.; Mygushchenko, R. P.; Stolbovoy, V. A.; Postelnyk, A. A.; Meylekhov, A. A.; Dolomanov, A. V.; Rebrova, Ye. M.
It is proposed to use the multiperiod binanolayer composites (TiAlSi)N/MeN (Me-Zr, Nb, Cr, Mo) for controlling the structure, stress state and mechanical properties of a multi-element nitride (TiAlSi)N. The deposition of the layers was carried out by the method of vacuum-arc evaporation at different bias potentials on the substrate Ub = -110 and -200 V. It has been determined that mononitrides with a high Me-N binding energy in the binanolayer composite determine the crystallite growth in thin (nanometer) layers. The growth texture is formed in composites containing mononitrides based on transition metals with a relatively small atomic mass (Cr, Mo) at Ub = -110 V. The growth texture is formed at a larger Ub = -200 V when dealing with mononitride based on heavy metal (Zr). The greatest hardness is achieved in textured materials deposited at Ub = -200 V. This is typical both for a monolayer multi-element nitride (TiAlSi)N (hardness is 42.5 GPa) and for multiperiod nanolayer composites based on it (the highest hardness is 47.9 GPa for a composite (TiAlSi)N/ZrN).