Кафедра "Технологія жирів і продуктів бродіння"

Постійне посилання колекціїhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/7476

Офіційний сайт кафедри http://web.kpi.kharkov.ua/food

Від 2011 року кафедра має назву "Технологія жирів і продуктів бродіння", первісна назва – "Технологія жирів".

Кафедра "Технологія жирів" розпочала свою діяльність у 1930 році. Від початку заснування ХПТІ, спеціальність технологія жирів була складовою частиною кафедри технології органічних і забарвлюючих речовин і тільки в 1923 році виділена в окрему групу.

Кафедра входить до складу Навчально-наукового інституту хімічних технологій та інженерії Національного технічного університету "Харківський політехнічний інститут". Випускники кафедри працюють в олійно-жировій, кондитерській, пивоварній, виноробній, спиртовій, лікеро-горілчаній та безалкогольній галузях харчової промисловості.

У складі науково-педагогічного колективу кафедри працюють: 3 доктора та 10 кандидатів технічних наук; 3 співробітника мають звання професора, 4 – доцента, 1 – старшого наукового співробітника.

Переглянути

Фільтри

20202

Налаштування

Автор: search.filters.author.Gladkiy, Fedir

Результати пошуку

Зараз показуємо 1 - 2 з 2
  • Ескіз
    Документ
    Technology of culinary (frying) fats
    (Scientific Route, Estonia, 2020) Udovenko, Oleksiy; Gladkiy, Fedir; Shkredov, Ivan; Havriushenko, Kateryna; Litvinenko, Olena; Kunitsia, Katerina
    The increased popularity of deep-fried foods has put health and safety concerns on the agenda. Factors that affect the quality and safety of culinary (frying) fats include the fatty acid profile, as well as cooking modes and time, especially when renewal rates are low. The industry is currently facing a top-of-mind technology challenge: to reduce the “oil content” of fried foods by developing a frying fat that would meet up-to-date food production standards. In other words, there is a need for a frying fat, which should last as long as possible without oxidizing and changing colour. Furthermore, its uptake by foods, fried in it, must be 40–50 % less than that of conventional fats. To this end, the authors put forward an innovative technology for producing culinary (frying) fats through esterification of fatty acids with high molecular weight alcohols. The research work that has been carried out so far prove the possibility of producing specialty fats by such modification to the applicable regulatory requirements: the melting range is between 29.6 and 34.65 °С, the acid value is up to 0.4 mg KОН/g. The viscosity of modified fats is lower than that of oils, which is due to the fat structure, and this circumstance will have a positive effect on the fat content in a finished product. The researchers has identified a numerical relationship (expressed as a regression model) of the yield of the desired fraction of a modified fat versus the ratio of reagents, reaction time, and process temperature, as well as calculated rational process parameters. The aim of the research is to develop the technology of obtaining culinary (frying) fats by esterification of fatty acids with high molecular weight alcohols.
  • Ескіз
    Документ
    Analysis of the influence of technological parameters of the chlorogenic acid extraction process from sunflower meal on the degree of its extraction
    (Технологический Центр, 2020) Labeiko, Marina; Gladkiy, Fedir; Bochkarev, Sergiy; Mazaeva, Viktoria; Litvinenko, Olena; Ovsiannikova, Tetiana; Zhyrnova, Svitlana; Sytnik, Natalia
    The object of research is the efficiency of extraction of chlorogenic acid ‑ the natural antioxidant, depending on the conditions of its extraction from sunflower meal. The main problem of this issue is the fact that the extraction degree of the specified phenolic compound is influenced by many factors, such as the degree of grinding of the product, the type of raw material, the method of extraction, the nature of the solvent-extractant, the temperature and duration of the extraction process, the hydromodule in the system "raw – extractant" etc. The impact of each of these parameters requires careful consideration and appropriate research. This will determine the optimal values of the specified parameters of the extraction process and increase the efficiency of extraction of chlorogenic acid. In this work, the raw material for the production of chlorogenic acid is a meal made from sunflower seeds – a cheap second raw material of oil and fat production. Previous studies have found that a high-efficiency extractant of the specified antioxidant is a solution of ethyl alcohol with a concentration of 60 %, and the optimum temperature of the process of extracting chlorogenic acid from sunflower meal is the boiling point of the extractant. As a result of this study, the regularity of the influence on the extraction degree of chlorogenic acid of such technological parameters as the hydromodule in the system "meal – ethyl alcohol solution 60 %" (hereinafter referred to as "meal – extractant") and the duration of the extraction process were studied. Experiments to determine the dependence of the extraction degree of chlorogenic acid on the hydromodule in the system "meal – extractant" and the duration of extraction were carried out in accordance with the plan of the full factor experiment. Mathematical methods using the Microsoft Office Excel 2003 (USA) and Stat Soft Statistica v6.0 (USA) software packages have been applied for experiment planning and data processing. The dependence indicated in the paper is a quadratic function that predicts an increase in chlorogenic acid content during extraction, with an increase in the hydromodule in the "meal‑extractant" system from 1:5 to 1:10 and a decrease in the extraction time from 60 minutes up to 30 minutes. It is established that for the maximum possible increase in the extraction degree of chlorogenic acid from the meal of sunflower seeds, the optimal value of the hydromodule extraction ‑ 1:10, the duration of extraction ‑ 30 minutes. The obtained results allow to increase the extraction degree of chlorogenic acid from sunflower meal from 2.46 % to 5.58 %. This indicates the possibility of increasing the efficiency of extraction of antioxidant more than 2 times.