Analysis of the Sanitary Purification of Gas Emissions from Dust in the Lime Manufacture

Скорочена інформація про документ
dc.contributor.authorPitak, Inna V.en
dc.contributor.authorBriankin, Serhii S.en
dc.contributor.authorPitak, Oleg Ya.en
dc.contributor.authorShaporev, Valery P.en
dc.date.accessioned2023-03-14T19:37:10Z
dc.date.available2023-03-14T19:37:10Z
dc.date.issued2017
dc.description.abstractExperimental studies have been carried out to study the effect of the location of the blade vortex from the end of the flue (the flow outflow from the flue to the separation chamber) by the value Vϕmax and the determination of the optimum cross section where Vϕmax is reached, and also the study of the influence of structural changes on the purification efficiency. The dependence of this swirler on the value of the tangential velocity of the gas flow at its exit from the separator is established. The cross-sections of the flue duct in which, after the swirler, the maximum values Vϕ, Vr are reached, the features of the dust-gas flow in the studied sections are considered. Based on the studies of the hydrodynamic situation during the flow of a rotating flow in the flue after the swirler, the possibilities of agglomeration of dust particles in the investigated zones, as well as the destruction of NOx gas impurities, are analyzed. During the operation of the reconstructed vortex dust collector, qualitative indices are attained, which confirm the expediency of the conducted studies and the expediency of reconstructing the vortex apparatus. It is proved that the installation of the blade vortex enhances the purification efficiency of the dust-gas flow in a vortex dust collector and will allow for a comprehensive purification of the exhaust gases.en
dc.identifier.citationAnalysis of the Sanitary Purification of Gas Emissions from Dust in the Lime Manufacture / Inna Pitak [et al.] // EUREKA: Physics and Engineering. – 2017. – No 5. – P. 65-72.en
dc.identifier.doidoi.org/10.21303/2461-4262.2017.00435
dc.identifier.orcidhttps://orcid.org/0000-0003-4935-8225
dc.identifier.orcidhttps://orcid.org/0000-0003-0444-9107
dc.identifier.orcidhttps://orcid.org/0000-0001-5912-4604
dc.identifier.orcidhttps://orcid.org/ 0000-0003-1652-4688
dc.identifier.urihttps://repository.kpi.kharkov.ua/handle/KhPI-Press/63304
dc.language.isoen
dc.publisherScientific Routeen
dc.subjectlime productionen
dc.subjectsanitary purification of gasesen
dc.subjectvortex swirleren
dc.subjectdust agglomerationen
dc.subjectseparatoren
dc.titleAnalysis of the Sanitary Purification of Gas Emissions from Dust in the Lime Manufactureen
dc.typeArticleen

Файли

Контейнер файлів
Зараз показуємо 1 - 1 з 1
Ескіз
Назва:
EUREKA_PE_2017_5_Pitak_Analysis_of_the_Sanitary.pdf
Розмір:
1.13 MB
Формат:
Adobe Portable Document Format
Опис:
Завантажити
Ліцензійна угода
Зараз показуємо 1 - 1 з 1
Ескіз недоступний
Назва:
license.txt
Розмір:
11.25 KB
Формат:
Item-specific license agreed upon to submission
Опис:
Завантажити

Зібрання

Кафедра "Хімічна техніка та промислова екологія"
Кафедра "Безпека праці та навколишнього середовища"
Публікації співробітників (ВІТВ НТУ "ХПІ")