Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
3 результатів
Результати пошуку
Документ Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium(Institute for Single Crystals, 2016) Ved, M.; Koziar, M.; Sakhnenko, N. D.; Slavkova, M.Functional electrolytic alloy coatings Co-Mo and Co-Mo-Zr were deposited on substrates steel 3 from polyligand citrate-pyrophosphate bath using pulsed current. It was shown that the alloying components content, their distribution on the surface, morphology and topography of the coatings are depended on the electrolysis energetic parameters. It was established that the functional properties of the binary and ternary electrolytic cobalt alloys (corrosion resistance, catalytic activity in hydrogen evolution and carbon II oxide oxidation) are predetermined by material composition, morphology and relief of the surface. Stability Co-Mn, and Co-Mo-Zr systems in aggressive media due to increased susceptibility to passivity when the molybdenum and zirconium are in the coating is a prerequisite of their use for corrosion protection. The high level of the catalytic properties of Co-Mn, and Co-Mo-Zr associated with different affinities for alloying metals to oxygen and hydrogen evolution mechanism verification allows to recommend them for platinum metals replacement in heterogeneous catalysis.Документ Galvanochemical formation of a multicomponent alloy based on cobalt and refractory metals(Kyiv National University of Technologies and Design, 2016) Hapon, Yu. K.; Nenastina, T. O.; Sakhnenko, N. D.; Ved, M. V.Effects of major parameters of electrolysis on the composition and morphology of the cobalt-molybdenum-tungsten alloy from citrate- pyrophosphate and citrate-ammonium electrolytes have been analysed. It has been shown that the content of component metals in the Co-W-Mo alloy depends on the nature and composition of the electrolyte solution. The influence of electrolysis conditions and regime on the structure and morphology of cobalt alloys with refractory metals has been established. The elemental composition and morphology of the triple cobalt - molybdenum - tungsten coatings have been determined with a scanning electron microscope.Документ Functional properties of multicomponent galvanic alloys of iron with molybdenum and tungsten(Institute for Single Crystals, 2015) Karakurkchi, A. V.; Ved, M. V.; Sakhnenko, N. D.; Yermolenko, I. Yu.; Zyubanova, S. I.; Kolupayeva, Z. I.Galvanic alloy coatings Fe-Mo (W) and Fe-Mo-W were deposited from citrate bath based on Fe (III) using both direct and pulsed current on substrates steel 3 and grey cast iron GC 18. It was shown that the alloying components content, their distribution on the surface, morphology and topography of the coatings are depended on the electrolysis mode. It was established that the functional properties of the binary and ternary alloys of iron (corrosion resistance, microhardness, antifriction et al.) exceed parameters of the substrate and are predetermined by the composition, structure, material and surface roughness.