Кафедри
Постійне посилання на розділhttps://repository.kpi.kharkov.ua/handle/KhPI-Press/35393
Переглянути
2 результатів
Результати пошуку
Документ Face milling of stell with octagonal insert(Національний технічний університет "Харківський політехнічний інститут", 2022) Makkai, TamasFace milling is often used to create flat surfaces, since when used as finishing, a suitable surface roughness can be achieved by fulfilling the specified dimension and tolerance requirements. In addition, high productivity can be reached by choosing the appropriate parameters of the cutting process. The cutting data also affect the cutting force and the wear of the tool, and another consideration is that the resulting vibrations can deteriorate the microgeometry of the surface. Several insert shapes are available for face milling. Experiments were carried out with a milling head equipped with a single octagonal insert. The effect of increasing the feed per tooth was examined through the cutting force components, while keeping the cutting speed and depth of cut fixed. The changes in the specific cutting force components were also analysed.Документ Analysis of the change in roughness on a face-milled surface measured every 45° direction to the feed(Національний технічний університет "Харківський політехнічний інститут", 2021) Nagy, Antal; Kundrak, JanosIn this article, we analyze the difference (inhomogeneity) of the roughness values measured on a nonalloy carbon steel surface milled with a parallelogram-shaped (κr = 90°) insert as a function of the the tool movement direction and the relative position of the examining points on the workpiece surface. The characteristic distribution of roughness and the magnitude of the deviations were examined by measuring at selected points along several planes on a surface characterized by the movement conditions of the workpiece and the symmetrically arranged tool perpendicular to the machined surface, which formed double milling marks. The selected points mark the lines with specified inclinations with respect to the feed direction, and their measured values were compared. In these directions, the magnitude of the difference in roughness measures was obtained.